TOR-1 is a device for quick and precise measurement of the moisture content in insulation oil, even in miniscule quantities.

ZP sorbent1 cartridges are designed for drying2 of lubrication3 and electrical insulation oils4 by zeolite5.

The СММ-1Н unit is designed for drying1, heating2 and filtration3 of mineral transformer oil4, as well as evacuation of transformer5 tanks.

We present to your attention a transformer vacuum1 furnace US-6S, designed for drying the solid insulation2 of power transformers3.

The Chemical Mixing1 Machine operates on the principle of transforming the energy of electromagnetic field2 into other forms of energy.

The Mixing1 Machine operates on the principle of transforming the energy of electromagnetic field2 into other forms of energy.

The purpose of the laboratory UVR unit is to test the possibility of purifying1 a specific petrochemical product.

The CMM-0.6 is designed for heating, pumping and processing electrical insulation and cooling oil (in transformers, on load tap changers, bushings, high voltage switches etc).

The USB-3 bitumen modification laboratory system is designed for preparation of small samples (no more than 10 liters per batch) of modified bitumen1.

The FB bitumen1 filter2 is designed to remove solid contaminants from bitumen and other non-corrosive liquids.

The USB-4 modified bitumen1 collection tank is designed for storage of modified bitumen produced with the UVB-2 unit.

This is a 20 m3/hour bitumen modification1 unit. The growing road construction and repair market leads to growing modified bitumen demand.

For outdoor operation the equipment can be manufactured in containers with rolling doors or anti-vandal protection.

The bitumen emulsion1 unit consecutively blends components in hydrodynamic mixers2 at certain pressures and temperatures.

This GlobeCore mobile oil processing unit is designed for degassing1, removal of solids and heating2 of oil for power transformers3 with voltage up to 1,150 kV.

The CFU unit is an on-site portable filtration1 unit designed for removal of solid particles from lube and dielectric insulation oils2 with viscosity3 of no more than 70 cSt at 50°C/122°F.

The Mojave Heat hot air dryer unit is designed for drying1 of air and removal of solid particles from atmospheric air, as well as for sorbent drying.

This oil heating unit is best suited for power plants, oil handling facilities, and facilities that perform transformer repairs and maintenance.