GlobeCore / Products / Custom Equipment / CMM-1 MOBILE OIL PLANT

CMM-1 MOBILE OIL PLANT

GlobeCore / Products / Custom Equipment / CMM-1 MOBILE OIL PLANT
СММ 1.0
The plant is assembled on a frame, supporting the unit’s components:  input and output oil pumps, dielectric control cabinet, vacuum1 chamber, coarse...
    ADVANTAGES
    • oil is purified by heat and vacuum, no need to reactivate or dispose of sorbent media;
    • simple operation and servicing;
    • mobility;
    • several operation modes (filtration, heating, filtration and vacuum purification, degassing).

The plant is assembled on a frame, supporting the unit’s components:  input and output oil pumps, dielectric control cabinet, vacuum1 chamber, coarse and fine cartridge filters2vacuum pump3 and pipelines with valves.

Parameter Value
Capacity, м3/hour / gals. per hour: 1.0/264.7
Max oil output temperature in heating mode, °C/°F 60/140
Processed oil parameters*: 10.0
• mass moisture content, g/ton max
• filtration fineness, micron 5
Oil output head, meters /yards 20/21.86
Max inlet pressure, MPa 0.1
Oil heater power, kW 25.2
Oil heater max mean surface power, W/cm2 1.1
Nominal power, kW 29
50 Hz AC power voltage, V** 380
Dimensions, mm/ft 1300//4’3’’
• length
• width 800/2’8’’
• height 1550/5’1’’
Weight, kg/lbs 540/1193

Note:  * Initial oil parameters:

  • mass moisture content – below 005% (50 g/ton)
  • heating of oil in the unit to +60ºC ±5ºС/140ºF ±9ºF for 30 minutes;
  • gas content below 10%.

**All equipment sold in the USA is designed to operate on 60 Hz AC Power

Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

  • oil is purified by heat and vacuum, no need to reactivate or dispose of sorbent media;
  • simple operation and servicing;
  • mobility;
  • several operation modes (filtration, heating, filtration and vacuum purification, degassing).
Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].