GlobeCore / Products / Custom Equipment / CMM-600CF TRANSFORMER OIL FILTRATION AND REFILLING MACHINE

CMM-600CF TRANSFORMER OIL FILTRATION AND REFILLING MACHINE

GlobeCore / Products / Custom Equipment / CMM-600CF TRANSFORMER OIL FILTRATION AND REFILLING MACHINE

CMM-600CF

The machine is designed for transportation and filtration of mineral and synthetic electrical insulation oil and for adding oil to...

works with both mineral and synthetic insulation oils;
versatility: both purifies the oil and adds oil to transformers;
includes reels for hoses.

Description
Specification
Advantages
Video

The machine is designed for transportation and filtration of mineral and synthetic electrical insulation oil and for adding oil to transformers.

Design

The machine is built on a wheeled frame with a hitch for towing on hard surfaces.

The machine includes two 200 liter (52 gallon) containers for oil storage and transportation. Pumps are installed for oil transfer.

Operation

The СММ-600CF machine purifies transformer oil by combined effects of filtration, heat and vacuum. The system is equipped with five filters:

a mesh filter for large particles;
a coarse inlet filter;
a fine filter at the outlet;
two filters to remove water entering the oil from the air.

Air bubbles are removed from the oil in the vacuum chamber.

Safety

Operation is managed by a PLC controller, which can identify the following faults:

frequency converter not ready or motor protection trips;
oil spill;
level sensor disconnect;
overflow in either of the containers;
vacuum chamber level sensor fault;
foam sensor activation in the vacuum chamber.

Any of these faults stops the machine. This condition is signaled by a sirene, a flashing light in the corresponding button and a text message on the controller screen.

Who this equipment is designed for

The СММ-600CF is designed for clients who specialize in transformer and other oil filled equipment servicing and repairs (including high voltage switches, OLTC, oil reactors etc).

Parameter				Value
Capacity, liters/hour (gpm), max			no degassing	1000 (4.4)
			degassing	600 (2.64)
* Output oil parameters:
		– ISO 4406 purity class		-/16/13
Output pressure, bar (psi)				2 (29)
Max power requirement, kW				1.55
Power supply
	– voltage, V			Fully customizable
	– AC frequency, Hz
Dimensions, mm (in)
	– length with tow hitch retracted			2200 (87)
	– height			1840 (72)
	– width			1100 (43)
Max weight, kg (lbs)				850 (1870)

* Note: – with initial oil quality -/18/16 per ISO 4406.

Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

works with both mineral and synthetic insulation oils;
versatility: both purifies the oil and adds oil to transformers;
includes reels for hoses.