Globecore’s PPM turbine oil heating system is intended to effectively warm the oil prior to its ingestion into the turbine lubricating system. By maintaining the necessary oil temperature, this equipment enhances flowability and guarantees continuous turbine equipment operation. Using a coolant that distributes heat uniformly to the oil, PPM prevents overheating and property degradation by operating on the indirect heating concept. The heating system prolongs the life of turbine units, enhances oil circulation, and helps avoid deposit development. The PPM is simple to use thanks to its small size and automated controls. The device is compatible with a variety of turbine oil types and is simple to integrate into current systems.
Turbine oil heating system PPM Specifications
| Parameter | Oil Heater Values | ||
| PPM-18 | PPM-50 | PPM-70 | |
| Throughput at inlet line pressure 0.2 MPa, m3/ hour, max | 2.2 | ||
| Throughput at inlet line pressure 0.24 MPa/cm2, m3/hour, max | – | 1,2 | 4 |
| Fluid pressure, MPa, max | 0.6 | 4 | 2.5 |
| Nominal power, kW | 19.5 | 56 | 74 |
| Power supply at ~ 50 Hz, V (60Hz upon request) | 380/220 | 380 | 380 |
| Max heating temperature, oС/ oF | 120/248 | 150/302* | |
| Dimensions, mm/ft, max | |||
| • length | 800/2’8” | 1180/3’11” | 1220/4’ |
| • width | 660//2’2” | 800/2’8” | 820/2’8” |
| • height | 1830//6’ | 1870/6’2” | 1900/6’3” |
| Weight, kg/lbs, max | 180/397.8 | 400/884 | 500/1,105 |
* Max heating temperature may be increased up to 200°С/ 392°F on customer request