CMM-4/7 portable oil degassing unit

UVM-4/7 Mobile oil plant

This GlobeCore mobile oil processing unit is designed for degassing, removal of solids and heating of oil for power transformers with voltage up to 1,150 kV.

The unit can be used to: (1) heat electrical systems that contain insulating oil with hot oil; (2) for vacuum drying of transformers and (3) for vacuumizing. The unit is best suited to facilities that install, repair and service oil filled electric power transformers and other oil filled electrical equipment.

The unit is not certified for use in and around explosive gases, toxic gases or other aggressive environments.

When indoors or other enclosed spaces, exhaust gases must be vented to the outside through hoses or pipelines.

Parameters

Value

Capacity, m3/hour / gals. per hour:  
  • degassing, nitrogenation, drying and filtration mode
4/1059.0
  • heating and filtration mode
7/1853.0
Capacity adjustment range, m3/hour / gals. per hour: 0-4.0/0.0-1059.0
Processed oil parameters*:  
  • volumetric gas content %, max
0.1
  • mass moisture content, g/ton, max
10
  • ISO 4406 purity class
9
  • solid particle content, g/ton, max
8
  • filtration fineness, micron
1
  • dielectric strength, kV, min
70
Oil temperature in heating mode, ºС/ ºF 90/194
Filtration rate ≥50
Outlet pressure, MPa 0.35
Oil output head, meters/yards 35.0/38.3
Oil heater power, kW 50
Oil heater mean surface power, W/cm2, max 1.15
Max power consumption, kW 60
Electric power  
  • voltage, V
400
  • AC frequency, Hz**
50/60
Dimensions, mm/ft  
  • length
3250/10’8’’
  • height
1940/6’4’’
  • width
1800/5’11’’
Weight, kg/lbs 1270/2,806.7

Note: * initial oil parameters:

  • volumetric gas content – below 5%;
  • mass moisture content – below 01% (100 g/ton);
  • temperature – above 0 ºС/ 32 ºF.

**All equipment sold in the USA is designed to operate on 60 Hz AC Power

Mobile oil plant - GlobeCore

обновлено: May 3, 2017 автором: dannik