UVB-1V Foam bitumen laboratory system

GlobeCore

Leave your request




Foam bitumen1Foamed bitumen is produced by adding small amounts of water to hot bitumen (approximately 2-3% by weight of bitumen). laboratory system

The UVB-1-V unit is designed for refining of foam bitumen formulas. It can be used by asphalt-concrete mix production facilities, as well as construction and road repair facilities.

The unit is designed for indoor use.

This product is designed for testing of known recipes of emulsions2Bitumenemulsion is a blend of fine beads of bitumen and water., primers3Bitumen Primer is a locally manufactured bitumen solution suitable for sealing and priming porous and non-porous surfaces. and liquid rubber4Liquid Rubber is a premium waterproof coating suitable for a wide range of projects around the house, yard, or building site.. It can also be used for development of new materials and emulsifiers and the corresponding research and experiments.

The system uses continuous bitumen5A bitumen is a sticky, black, and highly viscous liquid or semi-solid form of petroleum. mixing process with further dispersion6A dispersion is a system in which distributed particles of one material are dispersed in a continuous phase of another material. of bitumen and polymer in the mill7A mill is a device that breaks solid materials into smaller pieces by grinding, crushing, or cutting.. Unit design allows for addition of other liquid components in the process of bitumen modification8Modified bitumen is characterized by improved flexibility and longer service life, it also has a lower brittleness temperature and higher softening temperature..

The unit can be used by petrochemical facilities for optimization of modified bitumen production process, determining the required amount of modifying additives and using the prepared bitumen as a laboratory sample. The UVB-2L bitumen modification unit is designed for preparation of small samples (no more than 10 liters per batch) of modified bitumen.

Specifications

Value

Minimum mixer capacity for bitumen, l/hour

600

Water consumption, l/hour , min/max

6/30

Air consumption, l/hour , min/max

0/100

Bitumen pressure, max, MPa

1.6

Water pressure, max, MPa

0.6

Compressed air pressure (to mixer), max, MPa

0.6

Compresse air pressure (to controls), min/max, MPa

0.4/0.63

Bitumen temperature, min/max

140/160

Water temperature, °C, min/max

20/60

Oil temperature (for heating) °C, min/max

120/180

Nominal power, kW

10.4

Power voltage, V

380/220

Bitumen tank volume, liters

15

Water tank volume, liters

15

Volume of oil for heating, liters

10–15

Dimensions (L/W/H), mm 1250/970/1490
Max weight, kg

400

  • can be used by laboratories and research facilities;
  • produces foamed bitumen samples for laboratory testing.

Get a Quote



Quote for :