CMM-4RP Adsorbent Reactivation Unit

Adsorption1Adsorption is the adhesion of atoms, ions or molecules from a gas, liquid or dissolved solid to a surface. purification of oil products allows to improve their chemical and physical properties and performance without changing the composition of the products. The process removes unsaturated and aromatic hydrocarbons, tar, nitrogen, sulfur and oxygen containing compounds.

The effect is due to the ability of the sorbent2A sorbent is a material used to absorb or adsorb liquids or gases. to capture and hold the contaminants. With time, the rate of adsorption reduces and stops when a certain equilibrium is reached. At this time, the sorbent should be replaced or reactivated.

The existing methods of sorbent reactivation3Reactivation is restoration of operational properties of sorbents. are characterized by large losses of the sorbent (up to 30%) and the processed product. These factors prompted GlobeCore to develop the CMM-4RP  units for Reactivation of Sorbent for oil purification4Oil purification removes oil contaminants in order to prolong oil service life. .

This equipment is designed for restoration of saturated sorbents used in the oil purification processes. Using the CMM-4RP can save on the purchase of new and disposal of old sorbent.

Saturated sorbent is loaded into special columns, where it is subjected to high temperature and vacuum, removing the contaminants. After the process of reactivation if complete, the columns are inverted and the restored sorbent is unloaded. The oil captured by the sorbent previously is collected in a special vessel and can be reused.

Reactivation of used sorbents allows to restore their properties and use them to purify oil products with any degree of contamination.

Design and production of the unit can be customized. In this case, the lead time of the order is 45 days. Stock models of the sorbent reativation units can be purchased directly.

If needed, our specialists can visit your facility to commission the unit and train your personnel.

Frequently asked questions:

1. Which sorbents can be reactivated using the CMM-4RP?

This equipment can be used to reactive Fuller’s earth5Fuller’s earth is any clay material that has the capability to decolorize oil or other liquids without chemical treatment., various bleaching clays, palygorskite etc.

2. How much sorbent is lost during reactivation?

Less than 3-10%.

3. How long does the reactivation take?

Up to 20 hours.

4. How much sorbent can be reactivated in one cycle?

Up to 300 kg.

5. What should be done if the reactivation process does not start in one of the columns?

All columns operate separately. In this case, the problematic column is cut-off and the process continues in other columns.

6. What is the warranty on the equipment?

12 months from the date of commissioning.

Parameter Value
1 Nominal power, kW 18
2 Total power consuption per one reactivation cycle, kW×h 70
3 Voltage, V Customized
4 Control system Semi-automated
5 Dimensions, mm

– length

– width

– height




6 Weight, kg 2200

  • complete removal of oil captured by the sorbent;
  • reuse of the sorbent up to ten times after reactivations;
  • the reactivated sorbent can purify products with any degree of contamination;
  • sorbent reactivation costs are reduced;
  • transportation costs are reduced;
  • sorbent can be deactivated with disposal without harmful environmental effects.

Get a Quote

Quote for :

Messenger icon
Send message via your Messenger App