Transformers reference

Transformers reference

[1] Standard General Requirements for Dry-Type Distribution, Power, and Regulating Transformers, American National Standards Institute/Institute of Electrical and Electronic Engineers (ANSI/IEEE) C57.12.01, 1989.

[2] Standard General Requirements for Liquid-Immersed Distribution, Power and Regulation Transformers, Institute of Electrical and Electronic Engineers (IEEE) C57.12.00, 1993.

[3] Power Transformer Maintenance and Testing, General Physics Corporation, 1990.

[4] Guidelines for the Life Extension of Substations, Electric Power Research Institute (EPRI) TR-105070, April 1995.

[5] Guidelines for the Life Extension of Substations, Electric Power Research Institute (EPRI), 2002 update.

[6] Transformer Maintenance Guide, J.J. Kelly, S.D. Myers, R.H. Parrish, S.D. Myers Co., 1981.

[7] Transformer General Gasketing Procedures, Alan Cote, S.D. Myers Co., 1987.

[8] Recommended Practice for Electrical Equipment Maintenance, National Fire Protection Association (NFPA) 70-B-2002.

[9] Bushing Field Test Guide, Doble Engineering Company, 1966.

[10] Testing and Maintenance of High-Voltage Bushings, FIST 3-2, Bureau of Reclamation, 1991.

[11] General Requirements and Test Procedure for Outdoor Power Apparatus Bushings, Institute of Electrical and Electronic Engineers (IEEE) C57.10.00, 1991.

[12] Guide for the Interpretation of Gases Generated in Oil- Immersed Transformers, Institute of Electrical and Electronic Engineers (IEEE) C57.104, 1991.

[13] “Mineral Oil-Impregnated Electrical Equipment” in Service- Interpretation of Dissolved and Free Gas Analysis, International Electrotechnical Commission (IEC) 60599, 1997.

[14] Dissolved Gas Analysis of Transformer Oil, John C. Drotos, John W. Porter, Randy Stebbins, S.D. Myers Co., 1996.

[15] Recommended Practice for Installation, Application, Operation and Maintenance of Dry-Type General Purpose Distribution and Power Transformers, Institute of Electrical and Electronic Engineers (IEEE) C57.94, 1982.

[16] Criteria for the Interpretation of Data for Disssolved Gases in Oil from Transformers (A Review), by Paul Griffin, Doble Engineering Co., 1996.

[17] Maintenance of High Voltage Transformers, Martin Heath Cote Associates, London, England, 1989.

[18] Thermal Monitors and Loading, Harold Moore, Transformer Performance Montitoring and Diagnostics EPRI, September 1997.

[19] IEEE and IEC Codes to Interpret Incipient Faults in Transformers, Using Gas in Oil Analysis, R.R. Rogers C.E.G.B, Transmission Division, Guilford, England, circa 1995.

[20] IEEE Guide for Diagnostic Field Testing of Electrical Power Apparatus, Part 1: Oil Filled Power Transformers, Regulators, and Reactors, Institute of Electrical and Electronic Engineers (IEEE) 62, 1995.

[21] Maintenance of Liquid Insulation: Mineral Oils and Askarels, FIST 3-5, Bureau of Reclamation, 1992.

[22] Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method, American National Standards Institute/American Society for Testing and Materials (ANSI/ASTM) D 971-91.

[23] Experience with In-Field Water Contamination of Large Power Transformers, Victor V. Sokolov and Boris V. Vanin, Scientific and Engineering Center “ZTZ Service Co.,” EPRI Substation Equipment Diagnostics Conference VII, Ukraine, 1999.

[24] Proceedings: Substation Equipment Diagnostics, Conference IX, Electric Power Research Institute (EPRI), 2000.

[25] Reference Book for Insulating Liquids and Gases, Doble Engineering Company RBILG-391, 1993

[26] Guide for Loading Mineral Oil Immersed Transformers, American National Standards Institute/Institute of Electrical and Electronic Engineers (ANSI/IEEE) C57.92, 1981.

[27] Insulating Fluids, Doble Engineering Company Client Conference Minutes No. 65PAIC98, 1998.

[28] Trial-Use Guide for the Interpretation of Gases Generated in Silicone-Immersed Transformers, Institute of Electrical and Electronic Engineers (IEEE) P1258, 1999.

[29] Standard Specification of Nitrogen Gas as an Electrical Insulating Material, American Society for Testing and Materials (ASTM) D-1933-97.

[30] Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus, American Society for Testing and Materials (ASTM) D-3487, 1988.

[31] Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High Performance Liquid Chromatography, American Society for Testing and Materials (ASTM) D-5837, 1996.

[32] Standard Test Method for Compressibility and Recovery of Gasket Materials, American Society of Testing and Materials (ASTM) F-36, 1999.

[33] Standard Test Method for Rubber Property – Durometer Hardness, American Society of Testing and Materials (ASTM) D-2240, 1997.

[34] “Transformer Condition Assessment,” in Hydro Powerplant Risk Assessment Guide, a joint effort of Bureau of Reclamation, U.S. Army Corps of Engineers, Hydro Quebec, and Bonneville Power Administration (see appendix).

[35] Replacements, Bureau of Reclamation and Western Area Power Administration, July 1995.

[36] M5100 Sweep Frequency Response Analysis (SFRA) Instrument Users Guide, Doble Engineering Company, 2001.

[37] Maintenance Scheduling for Electrical Equipment, FIST 4-1B, Bureau of Reclamation, 2001.

[38] Thermographic Maintenance Program, FIST 4-13, Bureau of Reclamation.

[39] An Introduction to the Half-Century Transformer, Transformer Maintenance Institute, S.D. Myers, Co., 2002.

[40] Transformer Nitrogen Advisory, PEB 5, October 2000.

обновлено: September 8, 2017 автором: dannik