CMM-1H Oil Processing Unit

máquina de filtrado de aceite dieléctrico
The СММ-1Н unit is designed for drying1Drying is a process of water removal from transformer oil., heating2Oil heating is used...
    Advantages
    • the unit is equipped with a centrifugal output pump to reduce noise;
    • the unit does not have an input pump, the oil goes directly into the unit with reduced risk of leaks;
    • simple operation;
    • a porous inset in the vacuum chamber facilitates efficient moisture separation;
    • the smart heating system varies current for the required processing rate, eliminating voltage surges;
    • a water condensate collection container is installed;
    • the unit features a separate outlet for transformer evacuation.

The СММ-1Н unit is designed for drying1Drying is a process of water removal from transformer oil., heating2Oil heating is used for treatment of oil in degassing, drying and regeneration machines to accelerate the process. Dehydration is based on the difference of water and oil boiling points. Since water boiling point is lower, heating can evaporate that water from the oil before the boiling point of oil is achieved. and filtration3Oil Filtration is a partial removal of solid particles through filter medium. Oil filtration systems generally use a multistage filtration with coarse and fine filters. Centrifugation is separation of oil and water, or oil and solid particles by centrifugal forces. of mineral transformer oil4Transformer oil is an oil that is stable at high temperatures and has excellent electrical insulating properties., as well as evacuation of transformer5A transformer is a static electrical device that transfers electrical energy between two or more circuits. tanks.

The process is based on application of heat and vacuum6Vacuum is space devoid of matter. An approximation to such vacuum is a region with a gaseous pressure much less than atmospheric pressure.. The oil is heated and pumped to the vacuum chamber. The low pressure in the chamber makes the water in the oil boil and evaporate. The water vapor is removed with vacuum pump exhaust.

The СММ-1Н unit consists of the following elements: a frame, a centrifugal oil pump (output), a vacuum pump7A vacuum pump is a device that removes gas molecules from a sealed volume in order to leave behind a partial vacuum., an electrical control cabinet, a vacuum chamber, filters8Filter is a device which separates solids from fluids (liquids or gases) by adding a medium through which only the fluid can pass., an oil trap, piping, an instrument panel, an oil inlet and an oil outlet.

No

Parameter

Value

1 Capacity, m3/hour, max
  • oil drying mode

1

2 *Processed oil parameters:
  • moisture content, ppm, max

10

  • ISO 4406 purity class

-/15/13

3 Max oil temperature at outlet in heating mode, С

90

4 Outlet pressure, bar

2,5

5 Oil heater power, kW, max

23

6 Max power requirement, kW

25

7 Power supply:
  • Voltage, V

 400

  • Frequency, Hz

  50

8 Dimensions, mm
  • length

1250

  • height

1750

  • width

1250

9 Empty weight , kg, max

750

*Note – Initial oil quality parameters:

  • gas content: below 10.5 %;
  • moisture content: below 0.01 % (100 ppm);
  • temperature: above 0 °С.
Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

Aplication :

  • the unit is equipped with a centrifugal output pump to reduce noise;
  • the unit does not have an input pump, the oil goes directly into the unit with reduced risk of leaks;
  • simple operation;
  • a porous inset in the vacuum chamber facilitates efficient moisture separation;
  • the smart heating system varies current for the required processing rate, eliminating voltage surges;
  • a water condensate collection container is installed;
  • the unit features a separate outlet for transformer evacuation.
Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

Aplication :

The CMM-1H unit can be used for:

Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

Aplication :

Loading...

Components type - basic

Components type - premium

Manual performance adjustment by valves (or smooth performance adjustment, see option). Functioning in semi-automatic modes. Stepped or smooth (see option) oil heating. PLC control

Automatic performance adjustment. Functioning in automatic modes. Smooth oil heating. Control from PLC + HMI

Performance adjustment with manual valves

Performance adjustment of the vacuum pump is executed with a regulator on the control panel by means of a valve with an electric drive. Visual monitoring of the flow rate is by the flow meter indicator

Performance adjustment of the vacuum pump is executed by setpoint selecting at the control panel screen for maintaining the level in the vacuum column. Pump operation is smooth throughout the entire control range. There is a digital meter to control oil flow

The controller program switches the heater stages by contactors according to the algorithm. Operator sets the temperature and it is kept constant automatically

Solid state relay (SSR) adjusts the heater stages' current smoothly and non-contactly. The P-Int-Derivative Controller

The language of text at the controller screen, devices, controls and the language of the technical documentation is English

The language of text at the controller screen, devices, controls and the language of the technical documentation is upon customer's request

Mechanical flow meter with total flow display

Digital flow meter with current and total flow display

Capacitive transducer determines the activity of water dissolved in the oil and converts it into the absolute moisture content of the oil which entered the unit

Capacitive transducer determines the activity of water dissolved in the oil and converts it into the absolute moisture content of the oil which was processed by the unit

Capacitive transducer determines the activity of water dissolved in the oil and converts it into the absolute moisture content of the oil which entered the unit and which was processed by the unit

The cable is fitted with an industrial sealed connector, consisting of an internal plug and a cable socket

The cable wires' ends are fitted with a crimp terminals

The cable is fitted with an industrial sealed connector, consisting of an internal socket and a cable plug



Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

Aplication :

Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

Aplication :