What is the recommended silica gel heat treatment?
Asked: 十月 9, 2024 12:52 下午 by Christopher Mcdaniel
- 该话题包含 1个回复,2 人参与,最后由Olga Ivanova 更新于 8月、 3周前 。
Answers
-
十月 9, 2024 1:09 下午 by Olga Ivanova
The recommended heat treatment for silica gel involves heating it at a temperature range of 120-150°C for 2-3 hours. This allows the moisture trapped inside the gel to evaporate, restoring its adsorption capacity. It’s important to ensure the silica gel is spread evenly for consistent drying. For industrial-scale operations, GlobeCore offers advanced heat treatment systems for silica gel regeneration, providing precise control over temperature and time, ensuring efficient and uniform regeneration across large quantities.
Articles by Topic
- Mineral transformer oil residual gas content tester TOR-8
- Silicone transformer oil residual gas content tester TOR-8
- Midel 7131 transformer oil residual gas content tester TOR-8
- FR3 dielectric fluid residual gas content tester TOR-8
- Used zeolite regeneration machine in natural gas processing BRZ
- Used zeolite regeneration machine in industrial oils drying BRZ
- Used zeolite regeneration machine in remove pollutants from wastewater BRZ
- Used zeolite regeneration machine in recovery of catalysts in the process of oil cracking BRZ
- Used zeolite regeneration machine in converting biomass into biofuels BRZ
- Used zeolite regeneration machine in improve the performance of lithium batteries BRZ
- Used zeolite regeneration machine in semiconductors production BRZ
- Used zeolite regeneration machine in synthesis gas production BRZ
- Used zeolite regeneration machine in of cosmetics production BRZ
- Used zeolite regeneration machine in in food packaging moisture stabilisation BRZ
- Used zeolite regeneration machine in ventilation systems BRZ
- Fuel blending machine USB-1
- Water-alcohol solutions production machine USB-1
- Fruit juice production systems USB-5
- Thermal insulating materials drying system SSC-15
- Disinfectant materials drying system SSC-15
- Crystalline salts drying system SSC-15
- Ceramic pigments drying system SSC-15
- Modified bitumen storage tank USB-4
- Anionic bitumen emulsion storage tank USB-4
- Cationic bitumen emulsion storage tank USB-4
- Milk-processing factory wastewater treatment plant AVSk-150
- Wood drying system SSC-15
- Plant fibers drying system SSC-15
- Polymer materials drying system SSC-15
- Laboratory samples drying system SSC-15
- Bitumen mastic іstorage tank USB-4
- Bitumen primers storage tank USB-4
- Latex additives storage tank USB-4
- Construction resin storage tank USB-4
- Wind turbine gearbox oil changer CMM-G
Only registered users can answer. No account? Sign up!