- 您需要先登录才可以创建新话题。
Nancy Harris
Nancy Harris
已创建论坛回复
-
作者帖子
-
一月 24, 2026 11:24 下午 回复至： What topics are covered in an electric power transformer engineering PDF? #331751
Such PDFs summarize design fundamentals, insulation systems, thermal models, short-circuit withstand calculations, OLTC design, testing standards, protection, diagnostics, maintenance, and failure analysis, often with utility practices.
Same as above: placed in MV yards, urban substations, renewable plants, campus substations, and industrial service points that require moderate capacity and robust short-circuit withstand.
Routine tests include winding resistance, ratio, vector group, insulation resistance, tan-delta, PD, induced/AC withstand, and OLTC checks.
Power transformers step voltages up for transmission and down for distribution, matching levels for efficient energy transfer and load consumption.
Parts include core, primary/secondary windings, tap changers, bushings, cooling, tank, and protection accessories.
一月 22, 2026 9:45 上午 回复至： What is the role of vacuum in the CMM-12R oil regeneration systems process? #331226Vacuum promotes removal of dissolved gases and moisture, enhances filtration efficiency, and supports deep regeneration of oil chemistry, which is critical for restoring insulating properties.
It defines periodic testing intervals, component inspections, oil processing cycles, and refurbishment actions to manage aging.
一月 22, 2026 12:48 上午 回复至： How does the oil meter on the output hose contribute to service accuracy? #331097The built-in oil meter provides precise measurement of oil volume delivered during refill or drained from the gearbox. Accurate accounting of lubricant volumes helps confirm full exchange, prevents over- or under-filling, and supports record-keeping for maintenance audits and oil life tracking.
Gearbox flushing is critical because it removes residual worn particles, water, oxidation products, and other contaminants that standard draining cannot eliminate. During this process, flushing oil is pumped at pressure (up to 5 bar and heights up to 105 m) through internal gearbox channels to displace old contaminants. This helps prevent contamination of the new oil, ensuring the longevity and performance of the drivetrain.
HV units must meet high BIL ratings, low PD levels, controlled losses, stable impedance, robust cooling, and meeting grid protection, harmonics, and transient requirements.
The CMM-0.6L is designed for transformer oil purification and degassing. It can operate on 220 V or 380 V depending on configuration. Production is made to order; current lead time and pricing will be provided.
The TOR-80 breakdown voltage tester measures dielectric strength up to 80 kV. A budgetary quotation and delivery time will be sent.
The TOR-80 tester measures dielectric breakdown voltage up to 80 kV, suitable for educational and laboratory use. It includes automatic test sequences and IEC-compliant electrodes. Pricing and lead time will be provided.
The CMM-G wind turbine gearbox oil changer allows full replacement of oil in turbine gearboxes, including filtration and heating. A quotation and delivery schedule will be sent.
十一月 7, 2025 9:53 上午 回复至： Please quote CMM-0.6L to Puerto Cortes, Honduras, Central America. 220V, 60Hz, 1 Phase. #327098The CMM-0.6L transformer oil purification unit operates at 600 L/h and can be configured for 220V, 60Hz, single-phase supply. We will provide a quotation including shipping to Puerto Cortes, Honduras.
For hydraulic oil purification, GlobeCore offers vacuum dehydrators (CMM series) and fine filtration systems (CFU series). They remove water and solid particles, improving oil cleanliness and service life. Please specify oil viscosity, contamination type, and required capacity for proper selection.
The procedure involves heating the oil, removing solid particles via filters, then applying vacuum dehydration and degassing. GlobeCore systems automate this process, ensuring IEC-compliant results without interrupting transformer operation.
九月 15, 2025 8:09 上午 回复至： What’s the best way to perform hydraulic oil filtration in industrial systems? #325401Best practices include using offline filtration carts or bypass systems. GlobeCore provides plug-and-play hydraulic oil filtration units with 3-5 stage filters, particle counters, and optional water separation for oils in injection molding, presses, and gearboxes.
It includes oil testing (BDV, DGA, water content), thermal scans, vacuum oil filtration, and monitoring of core and windings. GlobeCore offers complete transformer service solutions – from on-site oil purification to deep regeneration and thermal vacuum drying.
Proper heating is essential to maintain bitumen viscosity for pumping and mixing. GlobeCore offers thermal oil and electric heating systems with precise control, ensuring energy efficiency and preventing overheating or degradation of the bitumen.
-
作者帖子