- 您需要先登录才可以创建新话题。
rost
rost
已创建论坛回复
-
作者帖子
-
rost管理员
Поясни більш зрозуміло і докладніше, дякую
rost管理员Що є у GlobeCore для цього?
rost管理员А можна відповідати українською мовою?
rost管理员Нічого не зрозумів, про що ви?
rost管理员No-load consumption is mainly due to core losses: hysteresis and eddy currents in the magnetic core material. Even with no secondary load, the primary must draw magnetizing current to maintain flux, and this causes continuous heating. Hysteresis losses result from domain realignment each cycle, while eddy current losses occur as induced currents circulate in laminations. No-load losses are nearly constant with voltage and independent of load, which is why utilities carefully specify low core-loss designs for high-efficiency operation.
rost管理员Key specs include kVA/MVA rating, HV/MV taps, impedance, vector group, BIL, cooling class, losses, OLTC, bushings, accessories, and standards compliance.
rost管理员Key parts include core, windings, insulation, tank, bushings, tap changer, cooling system, protection sensors, and oil or solid dielectric medium.
rost管理员Key issues include oil degradation, insulation aging, partial discharge, overheating, OLTC wear, bushing failures, moisture ingress, corrosion, vibration, and harmonics. These reduce dielectric strength, increase losses, and accelerate thermal aging.
rost管理员Its purpose is to transfer electrical energy between voltage levels, isolate circuits, control voltage via taps, and enable efficient power transmission and distribution.
一月 22, 2026 5:29 下午 回复至： What does a power transformer coil winding machine do in manufacturing? #331307rost管理员It winds copper or aluminum conductors onto formers or cores with precise tension, layering, insulation placement, and tap-lead routing, enabling consistent electrical characteristics and mechanical strength.
rost管理员It verifies the ability of winding insulation to withstand transient overvoltages produced by lightning or switching events. The test checks for partial discharge, insulation puncture, or turn-to-turn breakdown and confirms mechanical integrity under high transient stress.
rost管理员It verifies impedance, copper losses, and thermal/mechanical withstand under fault-level currents, ensuring compliance with standards.
rost管理员It verifies electrical, mechanical, and thermal performance against specified ratings, standards, and utility acceptance criteria.
rost管理员It verifies dielectric robustness and ensures that insulation systems meet utility impulse withstand specifications before commissioning.
一月 22, 2026 4:10 下午 回复至： What does Hammond Power Solutions transformer wiring typically include? #331297rost管理员It typically includes primary and secondary winding terminations, taps, grounding points, and auxiliary control wiring for fused disconnects or temperature monitors. HPS products may also provide multi-tap input arrangements for industrial voltages and configurable secondary outputs for machinery and power conditioning equipment.
rost管理员It typically illustrates external features-tank, radiators, bushings, and actuators-used in educational, presentation, or documentation contexts.
一月 22, 2026 3:38 下午 回复至： What does a power transformer testing and commissioning PDF typically cover? #331293rost管理员It typically covers factory acceptance tests, site acceptance tests, insulation tests, ratio and polarity checks, winding resistance, tan-delta, DGA procedures, oil handling, cooling system checks, OLTC testing, grounding, protection wiring, and energization steps. Commissioning sections outline pre-energization criteria, safety controls, documentation, and handover protocols for utility operation.
rost管理员It typically appears as a large tank with radiators, bushings, arresters, conservator, and OLTC cabinet, connected to busbars or overhead lines.
rost管理员It steps voltages between transmission and distribution levels, isolates circuits, controls voltage via tap changers and supports fault current management.
rost管理员It steps voltage between transmission and distribution levels, isolates circuits, enables voltage control via OLTC, and manages short-circuit currents.
-
作者帖子