Water is a dangerous enemy of the transformer, reducing the dielectric strength of transformer oil, accelerating the aging of oil and solid insulation.

ZP sorbent1 cartridges are designed for drying2 of lubrication3 and electrical insulation oils4 by zeolite5.

The processing capacity of the machine is 3000 to 7000 liters per hour and depends on the selected mode of operation.

The CMM-1/1 continues the excellent functionality of this series of equipment, but is designed to be more compact and economical.

The unit is designed for purification1 of industrial, hydraulic2, turbine3, transformer4 and other oil types, as well as diesel fuel5, kerosene6 and petroleum with especially high moisture content.

The GlobeCore СММ-4Т mobile oil station is designed for turbine oil treatment. Its purposes are oil purification3, removal of solid particles and water.

The purpose of the laboratory UVR unit is to test the possibility of purifying1 a specific petrochemical product.

The CMM-0.6 is designed for heating, pumping and processing electrical insulation and cooling oil (in transformers, on load tap changers, bushings, high voltage switches etc).

The unit is built as a self-contained unit with all components and operating assemblies protected by metal panels and easy opening gas-spring loaded doors on the sides and back of the unit.

This GlobeCore mobile oil processing unit is designed for degassing1, removal of solids and heating2 of oil for power transformers3 with voltage up to 1,150 kV.

The CFU unit is an on-site portable filtration1 unit designed for removal of solid particles from lube and dielectric insulation oils2 with viscosity3 of no more than 70 cSt at 50°C/122°F.

This oil heating unit is best suited for power plants, oil handling facilities, and facilities that perform transformer repairs and maintenance.

The GlobeCore regeneration1 process restores used oils to new like condition. This process makes it possible to fill transformers2 with oil that would previously have required disposal. The oil in the transformer3 can be used without replacement for the entire service life of the transformer.