GlobeCore FAQ
Topics
Last answer
- Need urgent pricing for replacement filters: 150 air filters (520×520×20 mm, 40 micron fiberglass) and 18 output filters (FE-27, 1 micron) for an oil treatment machine.
- 1 month, 1 week ago
- Would like to request servicing for a CMM-4.0LT device and confirm whether it can be used with turbine or gear oil.
- 1 month, 1 week ago
- Interested in installing a vacuum chamber for use in transformer manufacturing and would like contact for further discussion about the project.
- 1 month, 1 week ago
- Previously requested a quotation for an oil purification machine but did not receive a reply. Still interested in purchasing a new unit.
- 1 month, 1 week ago
- Looking for a vacuum oven to manufacture acrylic precision sheets, working between -0.6 and -0.8 bar. The sheets measure about 2 x 1.2 meters. What is the maximum oven size available, and can it be produced with two opposite doors?
- 1 month, 1 week ago
- Interested in wind turbine gearbox oil changer units, specifically models CMM-G and CMM-GL. Also need a version capable of pumping oil up to 150-160 m in height.
- 1 month, 1 week ago
- Need price information for the CMM-2.2 machine and confirmation if a towable version is available.
- 1 month, 1 week ago
- Looking for pricing on the CMM-4 mobile unit for transformer oil processing, to be delivered domestically.
- 1 month, 1 week ago
- Looking to purchase a TOR-3 Tan Delta Tester for transformer oil and dielectric fluids.
- 1 month, 1 week ago
- Need pricing for the CMM-2.2 oil purification unit, including shipping options and approximate weight.
- 1 month, 1 week ago
- Need a machine that removes toxic substances from transformer oil and allows the oil to be reused for other purposes.
- 1 month, 1 week ago
- Need the cost of purchasing the CMM-24R/10000 Type H and estimated delivery charges.
- 1 month, 1 week ago
- Need technical details and pricing for a hydraulic oil regeneration unit model CMM-6RLSL, including packing dimensions and approximate weight.
- 1 month, 1 week ago
- Interested in the UVR-0.1 system for regenerating small 200-liter batches of transformer oil. Need details on operation, delivery time, and cost. Can it operate on 480 V / 60 Hz, include online oil-condition monitoring, and perform degassing?
- 1 month, 1 week ago
- Need a transformer oil treatment machine for dehumidification, degassing, impurity separation, oil heating, and vacuum drying. Capacity about 3000 L/h for workshop use.
- 1 month, 1 week ago