佐々木 篤司
佐々木 篤司
Forum Replies Created
-
AuthorPosts
-
November 12, 2025 at 3:06 pm in reply to: Looking for a bare-shaft colloid mill for emulsion production. #327609佐々木 篤司Member
The CLM-4.1 bare-shaft mill is suitable for integration into existing plants. It provides precise emulsification for 3-6 t/h throughput.
November 8, 2025 at 9:07 am in reply to: I’m looking for this kind of oil-treatment plants? (specification ? 6000 L/h, IEC 60422, ? 2 µm filtration, 480 V / 220 V 60 Hz, ? 10 ppm final moisture) #327198佐々木 篤司MemberThe CMM-6RL regeneration plant fully meets these specifications. It processes up to 6000 L/h, includes heating, degassing, dehumidifying, and filtration (< 2 µm) modules, with automatic flow and safety control. It operates on 480 V or 220 V 60 Hz power and achieves residual moisture ? 10 ppm after a single pass. A detailed quotation and compliance statement to IEC 60422 can be provided.
September 10, 2025 at 1:19 pm in reply to: What is the transformer BDV test and what does it reveal? #325227佐々木 篤司MemberIt tests the oil’s dielectric strength. Low BDV indicates aging or contaminated oil. GlobeCore equipment is used worldwide to restore BDV levels through advanced vacuum and filtration technology, helping avoid outages.
September 10, 2025 at 7:30 am in reply to: RE: What is an oil BDV tester and how accurate is it? #325078佐々木 篤司MemberA quality transformer oil purifier machine should offer vacuum degassing, moisture removal to <10 ppm, and filtration to 1 �m. GlobeCore's models also include built-in BDV testing, flow control, and IEC compliance. They're suitable for both on-site and depot maintenance.
September 9, 2025 at 11:43 am in reply to: What is transformer oil reconditioning and how is it different from purification? #324925佐々木 篤司MemberReconditioning includes deep adsorption treatment to restore oil properties, not just remove particles or moisture. GlobeCore’s CMM-R units recondition oil onsite – making old oil usable again per IEC 60422.
佐々木 篤司MemberShell Turbine Oil 68 is designed for heavy-duty industrial turbines where thicker lubrication is needed. GlobeCore treatment units filter and degas Shell 68, extending its operational stability.
August 3, 2025 at 12:06 am in reply to: Transformer oil kaise banta hai? (How is transformer oil made?) #323572佐々木 篤司MemberTransformer oil is produced by refining and purifying mineral base stocks, or by synthesizing esters and silicone fluids for specialized applications. GlobeCore systems ensure the oil meets IEC and IEEE standards by removing moisture, gases, and impurities.
佐々木 篤司MemberTransformer oil is a specialized dielectric liquid that serves as a coolant and insulator for power and distribution transformers. GlobeCore equipment processes these oils to maintain dielectric strength and thermal efficiency.
佐々木 篤司MemberOil regeneration removes acids, sludge, water, and gases, restoring aged transformer oil to near-new condition and extending transformer life. GlobeCore regeneration plants offer continuous treatment, saving utilities from costly oil replacements.
佐々木 篤司MemberTack coat is a bonding layer made from asphalt emulsion to adhere new asphalt to old surfaces. GlobeCore equipment ensures the production of stable tack coat emulsions suitable for road paving projects.
July 25, 2025 at 6:39 am in reply to: What is the best tester for silicone transformer oil tan delta? #322327佐々木 篤司MemberThe GlobeCore TOR-3 is a tan delta tester designed for silicone transformer oil, measuring dielectric dissipation factor with precision to assess insulation quality in transformers.
July 25, 2025 at 6:27 am in reply to: What is the best lubricating oil moisture content tester? #322324佐々木 篤司MemberThe GlobeCore TOR-1 is a lubricating oil moisture content tester that detects both free and dissolved water, helping industries protect machinery and extend oil life.
April 6, 2025 at 3:01 am in reply to: How can byproducts (such as glycerol or other residual materials) be utilized or managed sustainably? #317863佐々木 篤司MemberThe main byproduct is glycerol, which can be purified and used in pharmaceuticals, cosmetics, or as a carbon source in anaerobic digestion. Residual materials from oil extraction (like liver tissue) can be processed into fishmeal or fertilizer, enhancing sustainability. The GlobeCore USB plant includes glycerin separation and methanol recovery systems, reducing waste and operational costs. Effective byproduct use supports circular bioeconomy models, especially in coastal or fishing communities where waste valorization is essential.
April 5, 2025 at 9:42 am in reply to: Which extraction and purification techniques are commonly used to process Chlorella microalgae oil? #317781佐々木 篤司MemberThe most common oil extraction methods for Chlorella include solvent extraction (typically using hexane), supercritical CO₂ extraction, and mechanical cell disruption followed by filtration. Ultrasound- or microwave-assisted extraction enhances lipid recovery from tough algal cell walls. After extraction, oil is filtered and may be degummed or neutralized before transesterification. Supercritical methods yield high-purity oil but are costly. For commercial viability, combining mechanical pre-treatment with solvent extraction offers an effective balance of yield, cost, and oil quality for biodiesel production.
March 24, 2025 at 2:34 pm in reply to: What type of mixer is best for polymer-modified bitumen production? #316434佐々木 篤司MemberThe USB 6 Impeller Stirrer is ideal for polymer-modified bitumen, ensuring uniform dispersion of SBS, EVA, and other polymer additives, stabilizing viscosity and elasticity.
March 24, 2025 at 3:02 am in reply to: Why is a high-efficiency varnish blending system important? #316319佐々木 篤司MemberHigh-efficiency blending prevents inconsistencies in viscosity, ensures proper solvent evaporation control, and improves final varnish performance. The USB 6 Impeller Stirrer provides precise, high-speed mixing for these benefits.
March 21, 2025 at 4:52 pm in reply to: How does gas purification and mixing technology work? #316087佐々木 篤司MemberThe USB 6 Impeller Stirrer ensures efficient contact between gases and chemical agents, facilitating absorption, neutralization, or purification processes in gas treatment.
佐々木 篤司MemberPPM (parts per million) in transformer oil is used to quantify the level of contaminants, moisture, or dissolved gases present, which can affect the oil’s performance and lifespan.
佐々木 篤司MemberSuppliers of transformer oil include major industrial chemical companies and electrical component distributors; these vendors provide oils that conform to international standards such as IEC or ASTM, ensuring proper performance in transformer applications.
佐々木 篤司MemberTransformers are filled with oil to provide electrical insulation and efficient cooling; the oil minimizes the risk of arcing, helps dissipate heat generated during operation, and protects internal components from contaminants and moisture.
-
AuthorPosts