Typical roles require electrical engineering backgrounds, knowledge of IEC/IEEE standards, factory testing, DGA/PD diagnostics, and field commissioning competencies.

It represents a step-up or step-down transformer symbolically to indicate voltage transformation, isolation, or phase shift in circuit diagrams.

Handbooks typically cover design theory, materials, electromagnetic modeling, thermal design, dielectric systems, OLTC mechanics, cooling classes (ONAN/ONAF/OFWF/GF), standards, factory testing, installation, protection schemes, diagnostics (DGA, PD, tan-delta, FRA), maintenance, failure modes, and asset management. Case studies and utility practices are often included.

Getting selenium to ppb is usually less about «stronger mixing» and more about selenium speciation + a polishing step. AVS (vortex layer) can intensify redox/precipitation and improve reagent contact, so it may help as a reaction accelerator in a chemical treatment train (similar to how GlobeCore describes AVS intensifying heavy-metal reduction/precipitation processes). But on its own, AVS is not a selective Se separator. In mining waters, iron co-precipitation works well for selenite, but removes very little selenate, and ppb targets typically require downstream clarification/filtration and often a final «polishing» technology (anion exchange, membranes, etc.). So: Yes, ppb is achievable, but usually with a multi-stage scheme (convert selenate ? selenite, co-precip/filtration, then polishing). AVS can be a useful intensifier in the reaction step-just don’t expect it to be the single device that guarantees ppb by itself.

Design calculations address core cross-section, flux density, copper losses, impedance, insulation levels, and thermal rise. Standards and load profiles guide the final design.

The TOR-100 oil breakdown voltage tester measures dielectric strength of transformer oils up to 100 kV in accordance with IEC 60156. We will provide pricing, availability, and information about official supply channels.

The CMM series purification systems remove moisture, gases, and solid contaminants from transformer oil. Available capacities range from 600 to 12 000 L/h. We’ll provide options and pricing details.

Transformer oil filtration systems by GlobeCore are designed to remove water, gases, and solids. Available models (CMM-0.6 to CMM-12) feature automatic controls, vacuum systems, and stainless-steel piping. Full specifications can be provided upon request.

The DGA (Dissolved Gas Analysis) test detects fault gases in oil. Before running the test, oil should be degassed to avoid false results. GlobeCore offers degassing units that prepare oil for accurate DGA readings and extend equipment life.

Shell Turbo 32 is a light-viscosity mineral turbine oil commonly used in compressors, pumps, and turbines. GlobeCore treatment plants remove particulates and water, extending the oil’s lifespan.