The CLM-100.3 dried apricot paste production machine, made by GlobeCore, is designed to turn dried fruits into a smooth, uniform food product. This technology is used in the food industry to make natural pastes, purees and fillings used in the production of sweets, drinks or health products. The plant uses a colloid mill to grind the raw materials to the right consistency. After pre-soaking, dried apricots are fed into the working chamber, where they are quickly and thoroughly ground up by the rotor. The result is a smooth, tasty paste that is full of nutrients. CLM-100.3 makes sure your product always has the same high quality, and lets you change how much grinding is done based on what the recipe needs. The plant is easy to clean and maintain, which is especially important for food industry enterprises. All parts that touch the product are made of materials that are safe for the food industry. It is very productive, so it can be used in small workshops and larger companies. It lets you quickly turn dried apricots into a great quality paste, which can be used to make all sorts of other products.
Dried apricot paste production machine CLM-100.3 Specifications
|
Seq. No. |
Parameter |
Value |
| 1 |
Unit capacity, m3/h (gpm) |
0.1 (0.44)* |
| 2 |
Funnel input volume, L (gal) |
5 (1.3) |
| 3 |
Shaft seal type |
labyrinth |
| 4 |
Knife axial gap (preset), mm (in) |
0.4…0.8 (1.5·10-2 … 3·10-2) |
| 5 |
Knife tip speed, m/s (mph), not more than |
40 (90) |
| 6 |
Mill shaft and bearing rotation speed, rpm |
5,880 |
| 7 |
Electric motor shaft rotation speed, rpm |
2,940 |
| 8 |
Drive power, kW |
3 |
| 9 |
Power voltage, V |
custom |
| 10 |
Dimensions, mm, not more than: |
|
|
-length |
600 (24) |
|
|
-width |
700 (28) |
|
|
-height |
650 (26) |
|
| 11 |
Weight, not more than, kg (lb) |
70 (154) |
* – depends on the product flowability and the set tool gap.