Unit Pengolahan Minyak CMM-1H
Unit
-
Keuntungan
- Unit dilengkapi dengan pompa output sentrifugal untuk mengurangi kebisingan;
- Unit tidak memiliki pompa input, sehingga minyak masuk langsung ke dalam unit dengan risiko kebocoran yang lebih rendah;
- Pengoperasian yang sederhana;
- Inset berpori di ruang vakum memfasilitasi pemisahan kelembapan yang efisien;
- Sistem pemanas pintar mengatur arus sesuai dengan laju pemrosesan yang dibutuhkan, sehingga menghilangkan lonjakan tegangan;
- Terdapat wadah pengumpul kondensat air;
- Unit dilengkapi dengan saluran keluaran terpisah untuk evakuasi transformator.
The СММ-1Н unit is designed for drying1Drying is a process of water removal from transformer oil., heating2Oil heating is used for treatment of oil in degassing, drying and regeneration machines to accelerate the process. Dehydration is based on the difference of water and oil boiling points. Since water boiling point is lower, heating can evaporate that water from the oil before the boiling point of oil is achieved. and filtration3Oil Filtration is a partial removal of solid particles through filter medium. Oil filtration systems generally use a multistage filtration with coarse and fine filters. Centrifugation is separation of oil and water, or oil and solid particles by centrifugal forces. of mineral transformer oil4Transformer oil is an oil that is stable at high temperatures and has excellent electrical insulating properties., as well as evacuation of transformer5A transformer is a static electrical device that transfers electrical energy between two or more circuits. tanks.
The process is based on application of heat and vacuum6Vacuum is space devoid of matter. An approximation to such vacuum is a region with a gaseous pressure much less than atmospheric pressure.. The oil is heated and pumped to the vacuum chamber. The low pressure in the chamber makes the water in the oil boil and evaporate. The water vapor is removed with vacuum pump exhaust.
The СММ-1Н unit consists of the following elements: a frame, a centrifugal oil pump (output), a vacuum pump7A vacuum pump is a device that removes gas molecules from a sealed volume in order to leave behind a partial vacuum., an electrical control cabinet, a vacuum chamber, filters8Filter is a device which separates solids from fluids (liquids or gases) by adding a medium through which only the fluid can pass., an oil trap, piping, an instrument panel, an oil inlet and an oil outlet.
