Sandra Green
Sandra Green
Toutes mes réponses sur les forums
-
AuteurMessages
-
novembre 12, 2025 à 3:17 am en réponse à : Interested in a trailer-mounted oil purification system with 9000 L/min capacity. #327561Sandra GreenMembre
A custom high-capacity CMM system can be designed for 9000 L/min with a multi-stage vacuum and filtration system. Technical layout and design proposal will be shared.
novembre 11, 2025 à 8:57 pm en réponse à : Developing a process to treat mineral slurries with cavitation and need to confirm abrasion resistance of the reactor. #327537Sandra GreenMembreCavitation reactors are made of stainless steel and can handle abrasive slurries up to 5% solids. For higher concentrations, special protective coatings are used.
novembre 10, 2025 à 9:55 am en réponse à : Question: Does the equipment work for oil regeneration? #327384Sandra GreenMembreYes, GlobeCore produces regeneration systems (CMM-R and UVR series) that restore the chemical and dielectric properties of aged transformer oil by removing acids, oxidation products, and sludge.
novembre 8, 2025 à 9:43 pm en réponse à : A power engineering company plans to establish a transformer repair and manufacturing facility and is interested in acquiring a transformer vacuum furnace similar in design to the UVS-6S. The company requests information about total cost including supply, installation, and commissioning. #327246Sandra GreenMembreGlobeCore manufactures transformer vacuum furnaces equivalent to the UVS-6S model, designed for drying and impregnation of transformer cores and windings. The complete package includes a vacuum chamber, heating system, control cabinet, and auxiliary equipment. A quotation can be provided for full supply, delivery, installation, and commissioning. Please confirm required chamber size and electrical parameters to finalize the proposal.
novembre 7, 2025 à 6:13 am en réponse à : Please more information about environmental effects of transformer oil recycling systems #327084Sandra GreenMembreOur transformer oil recycling systems use adsorbent reactivation technology, which reduces waste generation and eliminates hazardous disposal. Detailed environmental documentation is available upon request.
septembre 17, 2025 à 10:16 am en réponse à : How often should transformer oil filtration be done? #325562Sandra GreenMembreFrequency depends on transformer load and environmental conditions but is often recommended every 2–3 years. GlobeCore’s equipment allows quick on-site filtration or regeneration – reducing the need for oil replacement or external service.
septembre 10, 2025 à 8:35 am en réponse à : What’s the purpose of a DGA test of transformer oil? #325130Sandra GreenMembreThe Dissolved Gas Analysis (DGA) detects gases like hydrogen, methane, or acetylene that indicate internal faults. While GlobeCore doesn’t produce DGA analyzers, their purification systems are often used before or after testing to restore oil integrity.
septembre 9, 2025 à 12:13 pm en réponse à : What is transformer predictive maintenance and which tools are used? #324943Sandra GreenMembrePredictive maintenance uses DGA, thermal imaging, and trend analysis to catch faults early. GlobeCore supports this with oil testing, regeneration, and online monitoring systems – extending asset life.
septembre 9, 2025 à 11:18 am en réponse à : What is an oil purification system and how does it work? #324912Sandra GreenMembreAn oil purification system removes water, gas, and particles from industrial oils. GlobeCore systems use heating, vacuum dehydration, and multistage filtration to restore dielectric and lubricating properties – suitable for transformers, turbines, and hydraulics.
Sandra GreenMembre2380 turbine oil is a synthetic aviation-grade lubricant used in gas turbines and jet engines. GlobeCore purification systems extend its service life by removing water and dissolved gases.
juillet 31, 2025 à 11:27 am en réponse à : Why use Gulf transformer oil and how is it processed? #323185Sandra GreenMembreGulf transformer oils are mineral-based dielectric fluids designed for long-term electrical stability. GlobeCore purification units degas and filter Gulf oils, maintaining their dielectric strength and preventing premature aging.
juillet 30, 2025 à 8:28 am en réponse à : Why use Caltex transformer oil and how is it maintained? #323026Sandra GreenMembreCaltex transformer oils are refined mineral insulating fluids offering thermal stability and dielectric reliability. GlobeCore plants degas, dry, and filter Caltex oils, extending their lifespan and maintaining transformer efficiency.
Sandra GreenMembreFR3 oil is a natural ester-based transformer fluid known for biodegradability and high fire safety. GlobeCore units can filter, degas, and dry FR3 fluid to maintain optimal performance and extend equipment lifespan.
Sandra GreenMembreRS-1 asphalt emulsion is a rapid-setting cationic emulsion used as a tack coat and for sealing road layers. GlobeCore systems provide automated production of RS-1 emulsions with uniform quality.
Sandra GreenMembreBitumen emulsion for roads is a binder used in tack coats, surface dressing, and cold mix asphalt production. GlobeCore plants can produce all grades of road emulsions, including cationic, anionic, and polymer-modified formulations.
Sandra GreenMembreThe price of RS1 emulsion depends on raw materials and production scale. GlobeCore plants help producers achieve consistent RS1 quality while reducing costs through process automation.
juillet 24, 2025 à 10:32 am en réponse à : Field testing kit for lubricating oil water and particle detection #322260Sandra GreenMembreGlobeCore TOR-6 functions as a portable field kit for detecting water and particle contamination in lubricating oils, ideal for industrial maintenance teams.
juillet 24, 2025 à 10:14 am en réponse à : How to avoid transformer failures caused by water in oil? #322247Sandra GreenMembreRegular testing with GlobeCore transformer oil moisture testers ensures early detection of water contamination, preventing costly insulation breakdowns and outages.
juillet 24, 2025 à 7:50 am en réponse à : Transformer oil moisture testing kit for substations #322161Sandra GreenMembreGlobeCore offers the TOR-1 moisture testing kit for substations, enabling fast, precise on-site testing of transformer oil to maintain safe insulation properties.
Sandra GreenMembreThe cost of GlobeCore portable diesel fuel water analyzers varies by configuration, but they are far more cost-effective than repairs caused by contaminated fuel.
-
AuteurMessages