伊藤 聡太郎
伊藤 聡太郎
Toutes mes réponses sur les forums
-
AuteurMessages
-
伊藤 聡太郎Membre
The UVB-6 and UVB-10 plants are suitable for medium-scale emulsion production with automatic water-bitumen ratio control and colloid milling.
novembre 12, 2025 à 3:49 am en réponse à : Would like to know more about the unit, its maintenance, ability to handle modified emulsion preparation with latex, production rate, and general performance. #327563伊藤 聡太郎MembreThe bitumen emulsion plant supports latex and polymer incorporation for modified emulsions. Maintenance involves routine cleaning of the colloid mill and dosing lines. Production rate ranges from 4 to 25 t/h depending on configuration.
novembre 10, 2025 à 6:19 pm en réponse à : Request for technical information on the CMM-R online oil regeneration system for use in transformer maintenance and energy sector services. #327434伊藤 聡太郎MembreThe CMM-R series performs continuous regeneration of transformer oil while equipment remains energized. It removes acids, moisture, and oxidation products. Technical specifications and process diagrams will be provided.
伊藤 聡太郎MembreThe CMM-8LT transformer oil purification unit ensures removal of moisture and gases down to 10 ppm and 0.1 % vol respectively. A full technical and commercial offer will be provided upon request.
伊藤 聡太郎MembreThe process involves heating, coarse filtration, vacuum dehydration, fine filtration, and degassing. GlobeCore automates each stage in their purification systems, ensuring restored ISO cleanliness codes and prolonged oil life for transformers and hydraulics.
septembre 15, 2025 à 7:02 am en réponse à : ¿Cuál es la función de un equipo de filtrado de aceite profesional? #325377伊藤 聡太郎MembreLos equipos de GlobeCore están diseñados para trabajar con aceites industriales contaminados por agua, partículas o gases. Sus sistemas son móviles o estacionarios, adaptables a distintas viscosidades y con controles automáticos para operación continua.
septembre 10, 2025 à 11:37 am en réponse à : What is an industrial hot air dryer machine and where is it used? #325169伊藤 聡太郎MembreThese machines are used in manufacturing and power engineering for drying transformer windings and insulation. GlobeCore integrates hot air drying into their transformer service solutions – especially after oil draining or repair.
septembre 9, 2025 à 3:51 pm en réponse à : What does transformer operation and maintenance involve? #325013伊藤 聡太郎MembreIt includes regular inspections, oil analysis (DGA, BDV), temperature control, and purification. GlobeCore supports this with mobile units for oil regeneration and monitoring tools – helping operators extend transformer lifespan and avoid unplanned outages.
septembre 9, 2025 à 8:27 am en réponse à : What makes a transformer oil filtration machine by GlobeCore unique? #324821伊藤 聡太郎MembreGlobeCore’s transformer oil filtration machines feature multi-stage degassing chambers, high-precision sensors, and remote control options. Their systems ensure moisture removal <10 ppm and BDV >70 kV, helping utilities and OEMs maintain reliable insulation in high-voltage transformers.
août 2, 2025 à 8:26 am en réponse à : What is silicone transformer fluid and how is it maintained? #323478伊藤 聡太郎MembreSilicone transformer fluid is a non-flammable dielectric liquid designed for high fire safety and thermal stability in transformers. GlobeCore purification units degas and dry silicone fluids, keeping their insulating properties intact over long service intervals.
août 1, 2025 à 1:46 pm en réponse à : What are typical oil filled transformer sizes and how are they maintained? #323366伊藤 聡太郎MembreOil filled transformers range from small distribution units to multi-megawatt power transformers, all using insulating fluids for cooling and protection. GlobeCore regeneration plants process oils of any volume, ensuring they stay clean and compliant with standards.
août 1, 2025 à 8:46 am en réponse à : What is the difference between oil and dry type transformers? #323322伊藤 聡太郎MembreOil type transformers use mineral or ester fluids for cooling and insulation, while dry type transformers rely on air and solid insulation, offering greater fire safety indoors. GlobeCore equipment supports oil type transformers by purifying and regenerating their insulating fluids.
juillet 30, 2025 à 6:59 am en réponse à : What is Biotemp transformer oil and why is it preferred? #322996伊藤 聡太郎MembreBiotemp transformer oil is favored for its renewable base and high flash point, reducing fire and environmental risks. GlobeCore purification plants ensure Biotemp retains its dielectric properties by filtering and drying the fluid regularly.
伊藤 聡太郎MembreThe best transformer oil depends on application, with options including mineral oils, synthetic esters (Midel), and natural esters (FR3). GlobeCore systems handle all these fluids, ensuring each maintains maximum dielectric performance.
juillet 30, 2025 à 5:08 am en réponse à : What is a BDV transformer test and why is it performed? #322986伊藤 聡太郎MembreA BDV transformer test checks the dielectric strength of insulating oil, detecting contamination or degradation. GlobeCore systems ensure oils meet BDV thresholds by providing high-vacuum purification and regeneration.
juillet 29, 2025 à 5:00 am en réponse à : How much is used transformer oil worth and how can it be reused? #322841伊藤 聡太郎MembreUsed transformer oil prices vary by condition and region, but most aged oils can be regenerated to like-new quality. GlobeCore regeneration plants remove acids, sludge, and gases, allowing utilities to reuse oil instead of replacing it.
juillet 29, 2025 à 12:55 am en réponse à : What can be done with used oil-filled transformers to keep them operational? #322819伊藤 聡太郎MembreUsed oil-filled transformers can be serviced by purifying and regenerating their insulating oil to restore dielectric strength. GlobeCore offers mobile and stationary plants that clean and recycle oil, extending transformer reliability.
伊藤 聡太郎MembreThe price of bitumen emulsion depends on grade, emulsifier type, and production capacity. GlobeCore equipment enables producers to maintain competitive pricing while ensuring product consistency.
伊藤 聡太郎MembreThe easiest method to test hydraulic oil for moisture is to use a portable tester like GlobeCore TOR-1, which delivers fast, on-site results without the need for laboratory analysis.
juillet 23, 2025 à 12:57 pm en réponse à : How to comply with IEC standards for residual gas testing in transformer oil? #322082伊藤 聡太郎MembreThe GlobeCore TOR-8 meets IEC 60567 and ASTM D3612 standards for dissolved gas extraction and analysis, ensuring compliance with international transformer diagnostic practices.
-
AuteurMessages