The Globecore CLM-8/16 lotion production machine is intended for use in the pharmaceutical and cosmetics sectors. High quality is ensured by the final product’s consistent texture development and effective component blending. By utilizing the unit’s exact temperature, mixing speed, and processing time control mechanism, the procedure may be modified to suit various lotion compositions. In order to maintain active components and attain a continuous product consistency, this is crucial. Operators find it easier to work with the automated control system. Because of its adaptability and small size, the machine may be used in both small and large cosmetic enterprises. It is simple to integrate into current production lines.
Lotion production machine CLM-8/16 Specifications
| Parameter | Value |
| Mill capacity, m3/h (gpm) | 8… 16 (35… 70)* |
| Kinematic viscosity of product, mm2/s (St), not more than | 150 (1.5) |
| Initial size of polymer particles, mm (in), not more than | 5 (0.2) |
| Maximum operating pressure, MPa (psi) | 0.6 (87) |
| Rated rotation frequency, rpm | 2,950 |
| Drive motor power, kW | 75 |
| Parameters of electricity mains, V/Hz | custom |
| Nominal bore diameter of mill fittings, mm (in)
– inlet – outlet |
120 (4.7) 80 (3.1) |
| Operating temperature, °С (°F), not more than | 180 (356) |
| Mill shaft seal | packing |
| Knife gap adjustment type | manual |
| Knife gap adjustment range, mm (in) | 0,2…2 (8·10-3… 8·10-3) |
| Knife tip speed at 3,000 rpm, m/s (mph), not more than | 47 (105) |
| Dimensions (not more than), mm (in):
– length – width – height |
1,690 (67) 650 (26) 770 (30) |
| Net weight (not more than), kg (lb) | 780 (1,720) |
* – depending on the product (liquid).