The CLM-8/16 salicylic acid production machine For the chemical industry, Globecore developed the CLM-8/16, a state-of-the-art and highly efficient piece of equipment. The salicylic acid process steps can be executed with remarkable precision and flawlessness because to its design. The capacity of the CLM-8/16 to mix ingredients equally and control variables like temperature and pressure is very important for a reliable and pure final product. By operating in automatic mode, the machinery lessens the influence of human error and increases production safety. It is possible to adapt the process to the specific manufacturing requirements by using precise configurations.
Businesses of various sizes can use the CLM-8/16 due to its powerful control system and modest size. The equipment is easy to integrate into production and complies with strict safety standards.
Salicylic acid production machine CLM-8/16 Specifications
| Parameter | Value |
| Mill capacity, m3/h (gpm) | 8… 16 (35… 70)* |
| Kinematic viscosity of product, mm2/s (St), not more than | 150 (1.5) |
| Initial size of polymer particles, mm (in), not more than | 5 (0.2) |
| Maximum operating pressure, MPa (psi) | 0.6 (87) |
| Rated rotation frequency, rpm | 2,950 |
| Drive motor power, kW | 75 |
| Parameters of electricity mains, V/Hz | custom |
| Nominal bore diameter of mill fittings, mm (in)
– inlet – outlet |
120 (4.7) 80 (3.1) |
| Operating temperature, °С (°F), not more than | 180 (356) |
| Mill shaft seal | packing |
| Knife gap adjustment type | manual |
| Knife gap adjustment range, mm (in) | 0,2…2 (8·10-3… 8·10-3) |
| Knife tip speed at 3,000 rpm, m/s (mph), not more than | 47 (105) |
| Dimensions (not more than), mm (in):
– length – width – height |
1,690 (67) 650 (26) 770 (30) |
| Net weight (not more than), kg (lb) | 780 (1,720) |
* – depending on the product (liquid).