Globecore created the Mojave biomass dryer system, which effectively dries a variety of biomass materials, including sawdust, straw, wood waste, and other organic materials. In the fields of agriculture, biofuel production, and alternative energy, where it’s critical to lower the moisture content of raw materials prior to further processing, this equipment is in high demand. The Mojave unit’s primary benefit is that biomass may be dried quickly and uniformly without losing any of its beneficial qualities. A temperature and air flow control system installed in the facility enables accurate drying process regulation and prevents overheating. This guarantees that the biomass’s energy and structure are maintained, which is crucial for the creation of high-quality biofuels.
Biomass dryer system Mojave Specifications
| Parameter | Value | |
| Mojave Heat 0.7 | Mojave Heat 4 | |
| Dry air capacity, m3 /minute, min / cubic yard | 1.7/2.223 | 2.5/3.27 |
| Dry air dew point, °С/°F, max | -50/-58 | -50/-58 |
| Dry air pressure, MPa/bar, max | 0.018/0.18 | 0.025/0.25 |
| Max dry air temperature, °С/°F | 90±15/194±27 | 90±15/194±27 |
| Adsorbent load, kg/lbs, max | 190/419.9 | 190/419.9 |
| Number of adsorbers. | 1 | 2 |
| Zeolite regeneration temperature, °С/°F, max | 430/806 | 430/806 |
| Air heater power, kW, Max | 24 | 24 |
| Nominal power consumption, kW max | ||
| Air drying (normal operating mode) | 1 | 5.5 |
| Sorbent regeneration in one adsorber | 25 | 30 |
| Sorbent regeneration in two adsorbers | – | 55 |
| Nominal power voltage at 50Hz/ 60Hz, V (Electric power can be fully customized on request ) | 380 | 380 |
| Output air temperature for regeneration of external adsorbents, °С/°F, max | 430/806 | 430/806 |
| Duration of adsorbent regeneration, hours | 4 | 2-4 |
| Dry air filtration fineness, micron | 5 | 5 |
| Dimensions, mm/in, max: | ||
| • length | 1350 (53) | 1500 (59) |
| • width | 800 (32) | 1120 (44) |
| • height | 1700 (67) | 2120 (83) |
| Weight, kg/lbs, max | 550 (1210) | 1050 (2315) |