The GlobeCore UVD insulating oil injection machine into disconnectors is a reliable solution for the maintenance of high-voltage electrical equipment. It is intended to provide a quick and safe injection of insulating oil into disconnectors during installation, repair or routine maintenance. Disconnectors are used to safely disconnect electrical lines, and high-quality insulation is crucial. It is recommended that the proper oil level be maintained to help prevent overheating, provide reliable insulation and short-circuit protection. The UVD has been designed to allow oil to be injected evenly and safely into the disconnectors, with a view to preventing the formation of air bubbles and the ingress of contaminants. The unit has a pretty powerful pump that makes sure you’ve always got oil, even if you’re far away. It’s small and easy to move around, so it’s a breeze to use in substations, production sites and out in the field. GlobeCore’s UVD has been designed to be easy to use and maintain, with the aim of increasing the reliability of disconnectors, extending their service life and ensuring the smooth operation of power systems.
Insulating oil injection machine into disconnectors UVD Specifications
Parameter | Value |
Amount of prepared oil, liters/gals | 30/7.8 |
Amount of oil in filling section, liters /gals | 4/1.06 |
Residual pressure in degassing section, Pa (mm.hg) | 6.7 (5х10-2) |
Oil supply pressure, MPa (kg/cm2) | Up to…0.4 (up to…4) |
Nominal power, kW | 0.25 |
50/60 Hz power supply voltage, V (60Hz USA) | 220 |
Dimensions, mm/ft: | |
• length
• width • height |
900/2’11”
780/2’7” 1500/2’4” |
Empty weight, kg/lbs | 80/176.8 |