Millions of tons of used petroleum oils are produced every year in the world, most of which are motor oils. Today, the most rational method of handling such oils is their distillation to obtain new products. One of these products can be base oil, to which special additives are then added. They give oils specificRead More
Oil dewatering is one of the most important processes in ensuring the reliable operation of power transformers, which are among the most cost-intensive components of the entire power supply system. Any failure of these assets can cause severe disruptions in energy delivery and lead to significant financial losses for enterprises and utilities. Since most transformerRead More
The CMM-15 plant is designed for degassing, removing solids, and heating oil for power transformers with voltages up to 1,150 kV. The unit has a processing capacity of 15,000 liters per hour. It is built as a self-contained system, with all components and operational assemblies protected by metal panels and equipped with gas-spring-loaded doors on the sides and back for easy access.
The TOR-5 diesel fuel drying machine is a great way to get rid of any moisture in your diesel fuel before you use it or store it. If there’s water in the fuel, it can cause all sorts of problems, like corrosion of the fuel equipment, reduced engine performance, emulsion formation and even complete equipmentRead More
The TOR-5 heating fuel drying machine is an effective solution for preparing fuel for combustion in various types of furnaces and boilers. It has been suggested that the high humidity of fuel can have a number of consequences. These include a significant reduction in its calorific value, as well as complications in the combustion processRead More
The ZP-260 turbine oil drying machine made by Globecore is designed to remove moisture and gases from oils used in turbine equipment. Having moisture in turbine oil can reduce its dielectric and lubricating properties, speed up oxidation and damage operating components. The ZP-260 uses vacuum technology with controlled heating. It gently removes water and gasesRead More
The ZP-260 hydraulic oil drying machine made by Globecore is designed to remove moisture and dissolved gases from oil used in hydraulic systems on all kinds of industrial equipment. Having moisture in the hydraulic oil can reduce how well it lubricates and protects against corrosion, wear parts faster and even cause equipment to malfunction. TheRead More
The Globecore ZP-260 cable oil drying machine is designed to remove moisture and gases from insulating oil used in cable lines. Moisture in cable oil can reduce dielectric properties, cause breakdowns and accelerate ageing of cable insulation. The ZP-260 works on the principle of temperature controlled vacuum drying. This technology allows for efficient and gentleRead More
The ZP-260 compressor oil drying machine, a Globecore unit, is designed to remove moisture and gas from oil used in various types of compressors. It is important to note that using spoiled compressor oil can, unfortunately, lead to changes, a decrease in lubricating properties and equipment failure. The ZP-260 unit operates using vacuum drying technologyRead More
The ZP-260 silicone oil drying machine made by Globecore is used to efficiently remove moisture and gases from silicone dielectric liquids. These oils are used a lot in transformers, electrical equipment and other devices where it is important that they can resist high temperatures and chemicals. However, silicone oils are sensitive to moisture, which canRead More
Globecore’s ZP-260 gear oil drying machine is designed to remove moisture and gases from oil used in transmissions of various types of equipment. Timely cleaning and drying of oil allows you to significantly extend the life of equipment and increase its reliability. The principle of operation is based on vacuum drying and fine filtration. TheRead More
The dielectric fluid Midel 7131 drying machine, ZP-260, manufactured by Globecore, is designed to remove moisture from complex synthetic fluids used in transformers. Midel 7131 is a biodegradable insulating fluid that necessitates a high degree of purity and low moisture content for stable and safe equipment operation. The ZP-260 unit functions on the principle ofRead More
To eliminate moisture and gasses from eco-friendly FR3 transformer fluid, Globecore created the FR3 dielectric fluid drying machine ZP-260. The insulating qualities of oil are diminished by moisture, which may cause transformer performance to deteriorate. Utilizing the ZP-260 prolongs equipment life and preserves excellent fluid quality. The ZP-260 efficiently eliminates even the smallest moisture particlesRead More
The purpose of Globecore’s ZP-260 x-ray machines oil drying machine is to eliminate gasses and moisture from insulating oils used in x-ray equipment. Because moisture weakens the insulating qualities of oil and might cause failures, oil quality and purity are essential to the steady operation of X-ray machines. The ZP-260 thoroughly cleans the oil byRead More
The ZP-260 fire-resistant turbine oil Fyrquel drying machine from Globecore is made to efficiently extract gas inclusions and moisture from flame-retardant phosphate esters like Fyrquel. This apparatus contributes to increased oil life, enhanced oil performance, and dependable hydraulic and turbine system operation. The ZP-260 thoroughly cleans the oil by using vacuum drying technology, which getsRead More
Globecore’s ZP-260 industrial oil drying machine is made to efficiently extract moisture from hydraulic, turbine, transformer, and other technical oils. This apparatus aids in extending the life of oil, enhancing its performance attributes, and guaranteeing the dependable operation of industrial machinery. By using the vacuum drying method, ZP-260 can eliminate even the smallest moisture particlesRead More
In the electric power and gas processing industries, the quality and efficiency of zeolite drying processes are paramount. Zeolite, known for its exceptional adsorptive properties, is widely used for deep dehydration of natural gas and other applications requiring moisture removal. The SSC-15 Zeolite Drying Cabinet by GlobeCore offers an advanced solution for the preliminary dryingRead More
The BRPS zeolite regeneration machine from GlobeCore is an innovative method of recovering zeolite that has been utilized in the natural gas drying process. In the industrial sector, zeolite is frequently utilized as an efficient adsorbent to eliminate moisture and other contaminants from gas. Zeolite loses its adsorption capabilities over time, and in order toRead More
The CMM-2,0CF mobile oil plant is designed to purify industrial, hydraulic, turbine, and transformer oils, as well as diesel fuel, kerosene, and gasoline, even with high water content. The unit features an explosion-proof design for safe operation. Its capacity is 2.4 m³/h in both filtration and water removal modes.
The plant removes mechanical impurities and water using the coalescence method. It consists of a mobile platform with filters, a pumping assembly, and a push-button starter. A cartridge filter is included for removing mechanical impurities, with replaceable elements offering filtration fineness of 1, 3, 5, or 25 μm. Water is removed by coalescence: as oil passes through a special filter element, water molecules form droplets that flow down into a sump and can be drained via a valve.
GlobeCore provides the SSC-15, an innovative silica gel regeneration solution. By restoring the qualities of used silica gel, this extremely effective apparatus lowers the expense of buying new material and benefits the environment. With GlobeCore’s SSC-15, moisture and other impurities are swiftly and effectively removed from silica gel by using cutting-edge heating and drying technologies.Read More
GlobeCore provides the SSC-15, an innovative silica gel regeneration solution. By restoring the qualities of used silica gel, this extremely effective apparatus lowers the expense of buying new material and benefits the environment. With GlobeCore’s SSC-15, moisture and other impurities are swiftly and effectively removed from silica gel by using cutting-edge heating and drying technologies.Read More
The mobile oil station CMM-6LT is designed for thermovacuum drying, filtration, and purification of oils from mechanical impurities and water. It is suitable for oils used in lubrication systems, sealing systems, hydraulic control systems of gas turbine and gas compressor units, gas engine compressors, and transformers during operation and maintenance. The unit has a productivity of at least 6.0 m³/h in filtration mode and 4.0–6.0 m³/h in thermal vacuum drying mode. The CMM-6LT can clean contaminated oils from water, free and dissolved gases, and heat and dry oil-filled electrical apparatuses using the thermovacuum drying method. It also removes mechanical impurities through high-efficiency filter elements. The unit is intended for use in assembly, repair, and operational organizations engaged in oil processing and purification.
The CMM-8LT unit is designed for purification of electrical insulation oils from mechanical impurities and water, with a kinematic viscosity up to 70 cSt at 50 °C. The unit can also heat oil-filled electrical apparatuses with hot transformer oil and perform vacuuming. Its capacity is 8 m³/h. The station ensures oil purification up to class -/12/9 from an initial class of -/16/13, with a contaminant mass fraction not exceeding 0.004%, through multiple passes of the oil through the filter block. It is used in the assembly, repair, and operation of oil-filled high-voltage equipment such as power transformers and high-voltage switches.
When it comes to technological innovation in the energy industry, attention is often focused on big inventions — the latest generators, revolutionary methods of energy storage, or developments in the field of renewable energy. However, sometimes big changes start with something small, like replacing traditional transformer oil with a more modern and environmentally friendly alternative,Read More
The TOR-4 transformer oil drying unit efficiently removes water from transformers, keeping the oil dry regardless of temperature or water state. Oil circulates through filters and adsorbers before returning to the transformer.
A built-in logic controller monitors moisture content, filter pressure, pump operation, and transformer oil level. In the event of a leak, automatic valves stop the oil flow and shut down the unit. The TOR-4 has a drying capacity of 30 l/hour, can be connected in under an hour, operates without heating, requires no constant supervision, and can be installed either temporarily or permanently.
Transformers, the linchpins of our electrical infrastructure, are vital for the seamless transmission and distribution of electricity. However, their efficiency and lifespan can be compromised by a seemingly harmless element: moisture. Moisture within a transformer can result from various sources – be it residual moisture post-manufacturing, ambient humidity, or operational conditions. When this moisture interactsRead More
The CMM-2.2LT unit is designed for thermo-vacuum drying and filtration of industrial oils used in lubrication, sealing, and hydraulic control systems of gas turbines, gas piston units, gas engine compressors, and transformers. The unit effectively removes mechanical impurities and water from the oil. The capacity in thermo-vacuum drying and filtration mode is at least 2.2 m³/h. In addition, the CMM-2.2LT can be used for heating and drying oil-filled electrical equipment with hot transformer oil.
The СММ-4,0LT unit is designed for thermal vacuum drying and filtration of industrial oils used in lubrication, sealing, and hydraulic control systems of gas turbine and gas pumping units, gas engine compressors, and transformers. In addition to oil purification, the CMM-4,0LT can be used for heating and drying oil-filled electrical devices. The unit has a capacity of at least 4.0 m³/h (17.6 gpm) in thermal vacuum drying and filtration mode. The oil is drawn by vacuum through a coarse filter with a 200-micron filtration fineness into a vacuum tank containing a heater. Rising from bottom to top, the oil heats up and passes through a specially channeled lid into special fillers. As the oil flows downward through the fillers, moisture and gases are removed under vacuum. Finally, the oil is pumped from the bottom of the tank through two fine filters to the unit outlet, with filter fineness selectable at 5, 3, 1, or 0.3 microns.
The CMM-1H unit is designed for drying, heating, and filtration of mineral transformer oil, as well as for vacuuming transformer tanks. The treatment process is based on the combination of heat and vacuum: the oil is heated and fed into a vacuum chamber, where low pressure causes the water in the oil to boil and evaporate at lower temperatures. The water vapor is removed by a vacuum pump. The unit is equipped with an outlet centrifugal pump to reduce noise and an intelligent heating system that automatically regulates current and prevents voltage spikes. There is no inlet pump, so the oil is fed directly, reducing the risk of leaks. The CMM-1H has a drying capacity of up to 1 m³/h. After treatment, the moisture content is reduced to 5–10 ppm, and the oil cleanliness class meets ISO 4406: –/15/13.
The CMM-6/7 machine is designed for heating, pumping, and treatment of oil used as an insulator or coolant in electrical equipment such as transformers, OLTCs, transformer bushings, and high-voltage switches. The oil treatment process removes particulate matter, gases, and water. The unit can also remove air and gas from transformer tanks during repairs or servicing. Its processing capacity ranges from 3,000 to 7,000 liters per hour, depending on the selected mode of operation.
The CMM-6/7 has several operating modes: basic oil pumping with pumps and filters, heating and filtration where oil is heated and filtered, degassing where heat and vacuum remove water and gases, and evacuation for removing air from external equipment.
Produced water from oil and gas exploration and production. Man made bore holes cause many billions of cubic meters of water pouring out from the depths of the Earth and poison its surface and all living creatures in waterways. These include co-produced water in oil and gas production fields. The content of oil and gasRead More
The CMMur-1L is a compact and cost-effective unit designed for purifying electrical insulating oil with a viscosity of up to 70 cSt at 50 °C. It efficiently removes water and mechanical impurities, providing oil purification from an initial cleanliness class of –/18/16 to –/14/12 after multiple passes through the filters, with a contamination content of less than 0.004% by mass.
The unit is also intended for heating oil-filled electrical equipment with hot transformer oil and for evacuating air from vacuum systems. The CMMur-1L is used during commissioning, repair, and maintenance of power transformers, high-voltage circuit breakers, and other high-voltage equipment.
The CMM-1,0CF unit is designed for purification of industrial, hydraulic, turbine, transformer, and other types of oil, as well as diesel fuel, kerosene, and petroleum with exceptionally high moisture content. It can process oil with water content as high as 50 % or more. The unit has a processing rate of 1 m³/h. Filtration is performed in two stages with a fineness of 25 μm for stage 1 and 5 μm for stage 2. Water is removed by coagulation: as oil passes through a special filter element, water molecules form droplets that flow down into a settling vessel and can be drained via a valve. A cartridge filter with selectable fineness of 1, 3, 5, or 25 μm removes particulate matter from the oil.
A CMM-10TS unit was commissioned in a suburb of Chicago on 19-23 December 2017. This unit was designed and built to a custom order for thermal vacuum drying of high viscosity industrial oil with high water content. Commissioning confirmed the capabilities of the CMM-10TS, which can effectively dehydrate industrial oil contaminated with water: approximately 16Read More
The GlobeCore CMM-4,0T is a mobile oil station designed for turbine oil treatment, including purification, removal of solid particles, and water. The unit has a capacity of 4 m³/hour. Using the CMM-4,0T extends the service life of turbine oil, gas and steam machinery, turbine equipment, power plants, and other industrial facilities. Contaminated oil can cause various problems, so proper maintenance of oil-filled equipment is essential. Oil filtration provides an effective alternative to purchasing expensive new products. The CMM-4,0T system can be used for oil purification, dehydration, degassing, and evacuation. It is suitable for turbine oil with a viscosity not exceeding 280 cSt at 50 °C.
The CMM-10 transformer oil processing unit is designed for vacuuming transformers, removing mechanical impurities, and eliminating water and gases from electrical insulation oils. Its capacity is 10 m³/h (2,642 gal./h) in degassing, drying, and filtration mode, and 15 m³/h (3,970 gal./h) in heating and filtration mode. The unit is used during the installation, maintenance, and operation of oil-filled high-voltage equipment, including power transformers and high-voltage switches. It features a frame construction with a metal container and lockable doors.
