The GlobeCore UVD oil injection machine into oil-filled protective relays is a great choice for filling oil-filled protective relays. It’s designed to quickly and safely inject oil into protective relays during maintenance or commissioning. Oil-filled protective relays are really important for making sure electrical networks run smoothly, because they provide reliable insulation and overload protection. It’s really important that the oil level is enough and good quality, and that there aren’t any air bubbles or foreign particles that could reduce the insulating properties. The UVD makes sure the oil is injected in a consistent way, and the pressure control makes sure the relay always works properly. It’s got a pretty powerful pump that can get oil moving quickly, even over long distances. The UVD is great for use in substations, production facilities and service centres because it’s so mobile and compact. GlobeCore’s system is easy to use and maintain, and it helps to extend the service life of oil-filled relays, improve their reliability and ensure the smooth operation of power systems.
Oil injection machine into oil-filled protective relays UVD Specifications
Parameter | Value |
Amount of prepared oil, liters/gals | 30/7.8 |
Amount of oil in filling section, liters /gals | 4/1.06 |
Residual pressure in degassing section, Pa (mm.hg) | 6.7 (5х10-2) |
Oil supply pressure, MPa (kg/cm2) | Up to…0.4 (up to…4) |
Nominal power, kW | 0.25 |
50/60 Hz power supply voltage, V (60Hz USA) | 220 |
Dimensions, mm/ft: | |
• length• width
• height |
900/2’11”
780/2’7” 1500/2’4” |
Empty weight, kg/lbs | 80/176.8 |