Globecore’s PPM heat carriers heating system is made to safely and effectively heat a variety of thermal fluids, including water, antifreeze, and thermal oil. This equipment is perfect for process, heat exchange, and industrial heating applications.
Indirect heating is the basis for how the PPM operates. Heat is transferred to the linked consumers by the heat transfer fluid, which circulates throughout the system and heats up uniformly. This method guarantees temperature stability and removes the possibility of overheating, which is crucial for procedures requiring exact control over thermal parameters. The PPM is simple to integrate into current process lines due to its small size and ingenious construction. The device enables accurate control of operating settings and is simple to use.
Heat carriers heating system PPM Specifications
| Parameter | Oil Heater Values | ||
| PPM-18 | PPM-50 | PPM-70 | |
| Throughput at inlet line pressure 0.2 MPa, m3/ hour, max | 2.2 | ||
| Throughput at inlet line pressure 0.24 MPa/cm2, m3/hour, max | – | 1,2 | 4 |
| Fluid pressure, MPa, max | 0.6 | 4 | 2.5 |
| Nominal power, kW | 19.5 | 56 | 74 |
| Power supply at ~ 50 Hz, V (60Hz upon request) | 380/220 | 380 | 380 |
| Max heating temperature, oС/ oF | 120/248 | 150/302* | |
| Dimensions, mm/ft, max | |||
| • length | 800/2’8” | 1180/3’11” | 1220/4’ |
| • width | 660//2’2” | 800/2’8” | 820/2’8” |
| • height | 1830//6’ | 1870/6’2” | 1900/6’3” |
| Weight, kg/lbs, max | 180/397.8 | 400/884 | 500/1,105 |
* Max heating temperature may be increased up to 200°С/ 392°F on customer request