GlobeCore’s US-6S traction transformers vacuum drying oven is the most reliable piece of equipment out there. It’s been shown that it’s great at removing moisture from transformer windings used in transport systems. The system has been engineered down to a fine art to get transformers ready for use or maintenance. When the conditions are really tough, like when the temperature and humidity are all over the place, we’ve seen moisture build up in the transformer windings. It’s pretty obvious that this leads to a drop in insulation levels and an increase in the chance of short circuits. The US-6S creates a vacuum, which means that moisture evaporates at a low temperature. This prevents damage to insulation materials. The unit’s got a sealed chamber, a powerful vacuum pump and an automatic temperature and pressure control system. This setup makes sure transformers of all sizes are dried the same way and safely. GlobeCore’s US-6S has been shown to be a reliable solution for transport infrastructure companies wanting to extend the service life of traction transformers and to make sure they’re stable and safe.

Traction transformers vacuum drying oven US-6S Specifications

No.	Parameter	Value
	Drying chamber
1	Internal dimensions, mm, max
	– depth	2,000
	– width	1,300
	– height	1,600
	Heating section
2	Heater power, kW	45
3	Temperature adjustment range, °С	20…120
4	Quantity of thermal electric heaters, pcs	15
	Vacuum section
5	Capacity, m³/h	1,000
6	Total power level of engines, kW	11
7	Achieved vacuum level, mbar	1
	Circulation system
8	Capacity, m³/h	2,000
9	Fan power, kW	2.2
	Exhaust system
10	Capacity, m³/h	2,000
11	Fan power, kW	1.1
	Condensation system
12	Chiller power, kW	3.0
13	Cooling performance of chiller, kcal/h	6,000
14	Condensation area, m²	7.5
15	Heat exchanger (condenser) type	shell-and-tube
	Pneumatic system
16	Compressor power, kW	1.1
17	Pressure, bar	9