GlobeCore / Application / Used zeolite regeneration machine in remove pollutants from wastewater BRZ

Used zeolite regeneration machine in remove pollutants from wastewater BRZ

Used zeolite regeneration machine in remove pollutants from wastewater BRZ

The BRZ is used zeolite regeneration machine in remove pollutants from wastewater. This machine was produced by GlobeCore. The product has been developed to restore the sorption properties of zeolite, which is an essential component of wastewater treatment filter systems. Zeolite is great at soaking up heavy metals, ammonium, organic matter and other impurities from wastewater. But over time, zeolite can get less effective and need to be cleaned. The BRZ plant lets you regenerate zeolite using thermal treatment. This basically involves heating the material to a specific temperature to remove any accumulated contamination. Once cooled, you can re-use the zeolite without losing any efficiency. The process happens in a sealed chamber with thermal insulation. The plant has a temperature control system, ventilation and a control panel that’s really easy to use. All the bits that go into contact with the material are made of materials that can resist heat and chemicals. The BRZ is a great addition to wastewater treatment systems in all sorts of industries. It’ll save you money on new sorbent and reduce waste, making water treatment more sustainable and cost-effective.

Used zeolite regeneration machine in remove pollutants from wastewater BRZ Specifications

Parameter Value
Heater power, kW 10.8
Cooler blower drive power, kW 0.75
Nominal power, kW 13.2
Zeolite drying mode parameters
  • air blower throughput, m3/minute
2.3
  • hot air temperature, oC/F
250/483
Vacuum pulling mode parameters
  • evacuation rate, l/second
6.6
  • residual pressure, mbar (mPa)
250
Dimensions, mm:
  • length
1100/3’3’’
  • width
650/2’2’’
  • height
1250/4’1’’
Weight, kg 220/486.2

    Leave Your Request