The PPM hydraulic oil heating system, created by GlobeCore, is a cutting-edge piece of machinery intended to keep hydraulic oils in a variety of industrial systems at the ideal temperature. For businesses that operate in low-temperature situations, where proper temperature regulation is a critical component of hydraulic system stability, this solution is extremely vital.
PPM prevents thickening of hydraulic oil and ensures that the system operates normally by heating it effectively and uniformly. By doing this, the likelihood of equipment failure is decreased and the service life of hydraulic components is greatly extended. By keeping the oil within the predetermined temperature range and avoiding overheating, the heating system operates automatically.
The PPM system’s energy efficiency is one of its main benefits. The machinery uses the least amount of energy.
Hydraulic oil heating system PPM Specifications
| Parameter | Oil Heater Values | ||
| PPM-18 | PPM-50 | PPM-70 | |
| Throughput at inlet line pressure 0.2 MPa, m3/ hour, max | 2.2 | ||
| Throughput at inlet line pressure 0.24 MPa/cm2, m3/hour, max | – | 1,2 | 4 |
| Fluid pressure, MPa, max | 0.6 | 4 | 2.5 |
| Nominal power, kW | 19.5 | 56 | 74 |
| Power supply at ~ 50 Hz, V (60Hz upon request) | 380/220 | 380 | 380 |
| Max heating temperature, oС/ oF | 120/248 | 150/302* | |
| Dimensions, mm/ft, max | |||
| • length | 800/2’8” | 1180/3’11” | 1220/4’ |
| • width | 660//2’2” | 800/2’8” | 820/2’8” |
| • height | 1830//6’ | 1870/6’2” | 1900/6’3” |
| Weight, kg/lbs, max | 180/397.8 | 400/884 | 500/1,105 |
* Max heating temperature may be increased up to 200°С/ 392°F on customer request