GlobeCore / Air Drying / Cable drying system Mojave

Cable drying system Mojave

Сable drying system Mojave

A creative way to effectively dehumidify and dry cables in a range of industrial settings is GlobeCore’s Mojave cable drying system. Moisture that gets past a cable’s insulating layers can seriously deteriorate it electrically and cause cable failure. With its rapid moisture removal capabilities, Mojave helps to prolong cable life and lower failure rates.
High performance and energy economy are the Mojave system’s key advantages. The system makes use of vacuum drying technology, which efficiently and without causing structural damage eliminates moisture from conductors and cable insulation. By ensuring uniform drying, this method considerably enhances the electrical performance of the cable and guards against possible in-service failures.
Mojave takes little upkeep and is simple to operate.

Cable drying system Mojave Specifications

Parameter Value
Mojave Heat 0.7 Mojave Heat 4
Dry air capacity, m3 /minute, min / cubic yard 1.7/2.223 2.5/3.27
Dry air dew point, °С/°F, max -50/-58 -50/-58
Dry air pressure, MPa/bar, max 0.018/0.18 0.025/0.25
Max dry air temperature, °С/°F 90±15/194±27 90±15/194±27
Adsorbent load, kg/lbs, max 190/419.9 190/419.9
Number of adsorbers. 1 2
Zeolite regeneration temperature, °С/°F, max 430/806 430/806
Air heater power, kW, Max 24 24
Nominal power consumption, kW max
Air drying (normal operating mode) 1 5.5
Sorbent regeneration in one adsorber 25 30
Sorbent regeneration in two adsorbers 55
Nominal power voltage at 50Hz/ 60Hz, V (Electric power can be fully customized on request ) 380 380
Output air temperature for regeneration of external adsorbents, °С/°F, max 430/806 430/806
Duration of adsorbent regeneration, hours 4 2-4
Dry air filtration fineness, micron 5 5
Dimensions, mm/in, max:
• length 1350 (53) 1500 (59)
• width 800 (32) 1120 (44)
• height 1700 (67) 2120 (83)
Weight, kg/lbs, max 550 (1210) 1050 (2315)

    GlobeCore

    Leave your request