Globecore’s PPM wastewater heating system is intended to heat wastewater in industrial facilities in an effective and secure manner. It is employed to keep wastewater from freezing in tanks and pipelines and to keep it at a consistent temperature for transit or additional treatment.
Indirect heating technique is one of the PPM system’s unique features. Thermal oil or another heat transfer medium is heated by the plant and then transfers the heat to the wastewater. This method assures uniform heating and extends equipment life by removing the possibility of direct contact between the fluid and the heating sources. In addition to being simple to use and enabling accurate temperature management, the PPM system is simply linked into current utility networks. It is appropriate due to its small size.
Wastewater heating system PPM Specifications
| Parameter | Oil Heater Values | ||
| PPM-18 | PPM-50 | PPM-70 | |
| Throughput at inlet line pressure 0.2 MPa, m3/ hour, max | 2.2 | ||
| Throughput at inlet line pressure 0.24 MPa/cm2, m3/hour, max | – | 1,2 | 4 |
| Fluid pressure, MPa, max | 0.6 | 4 | 2.5 |
| Nominal power, kW | 19.5 | 56 | 74 |
| Power supply at ~ 50 Hz, V (60Hz upon request) | 380/220 | 380 | 380 |
| Max heating temperature, oС/ oF | 120/248 | 150/302* | |
| Dimensions, mm/ft, max | |||
| • length | 800/2’8” | 1180/3’11” | 1220/4’ |
| • width | 660//2’2” | 800/2’8” | 820/2’8” |
| • height | 1830//6’ | 1870/6’2” | 1900/6’3” |
| Weight, kg/lbs, max | 180/397.8 | 400/884 | 500/1,105 |
* Max heating temperature may be increased up to 200°С/ 392°F on customer request