• Home
  • Products
    • Oil Regeneration
      • CMM-6RL Oil Regeneration Unit
      • CMM-10RL Transformer Oil Regeneration Plant
      • CMM-12R Oil Regeneration Systems
      • CMM-12R Oil Regeneration System (With Activated Bauxite)
      • CMM-8RSL/4000 Transformer Oil Regeneration Plant (With Fuller’s Earth)
      • USB-6 Oxidation Inhibitor injection unit
      • СММ-0,001U Laboratory Oil Filtration Unit
    • Oil Purification & Degassing Machines
      • CMM-0.6L Oil Degassing & Filtration Cart
      • СММur-1L mobile oil plant
      • CMM-1.0LT Transformer Oil Purification Unit
      • CMM-1H Oil Processing Unit
      • CMM-2.2LT Industrial Oil Purification Unit
      • CMM-4,0T Turbine oil filtration
      • CMM-4,0LT Transformer Oil Purification Unit
      • CMM-4/7 portable oil degassing unit
      • CMM-6LT Industrial Oil Purification Unit
      • CMM-6/7 Degassing Unit
      • CMM-8LT Oil Processing Unit
      • CMM-10 — Transformer Oil Purification Machine
      • CMM-15 Oil Degassing Plant
    • Oil Filtration Machines
      • CMM-1,0CF Unit for Removal of Water from Oil
      • CMM-2,0CF Unit for Removal of Water from Oil
      • CMM-1,2Fr Industrial oils filtration unit with self-cleaning filters
      • CMM-4,0F Oil filtration unit
    • Oil Drying Unit
      • ZP-130 Sorbent Cartridges
      • ZP-260 Sorbent Cartridges
    • Oil Heating
      • PPM Inline Oil Heater. Stream oil heating
    • Fuel Polishing
      • TOR-1 diesel fuel moisture content tester
      • CMM-6RL dark diesel fuel polishing machine
      • CMM-6RL dark heating fuel polishing machine
      • CMM-6RL low-viscosity marine fuel polishing machine
    • Online Transformer Dry-Out Systems
      • CMM-260C Online Transformer Dry-Out System
      • TOR-4 Online Transformer Dry-Out System
    • Online Transformer Monitoring Systems
      • TOR-5 Online Transformer Monitoring System
    • Transformer Maintenance
      • Mojave Heat (Sukhovey): Hot Air Dryer Unit
      • UVV Vacuum Cold Trap
      • US-6S Transformer Drying Oven
      • LFD Low Frequency Heating Device
      • BV-3000 Transformer Evacuation System
      • BV-5000 Transformer Evacuation System
      • UVD Vacuum Oil Filling Unit
      • UVD-1000 Oil Filling and Transportation System
      • TSS Transformer Safety System
      • CMM-6RL Oil Regeneration Unit
      • CMM-10RL Transformer Oil Regeneration Plant
      • CMM-12R Oil Regeneration Systems
    • Vacuum Transformer Drying Ovens
      • US-6S Transformer Drying Oven
    • Sorbent Processing
      • ZP-130 Sorbent Cartridges
      • ZP-260 Sorbent Cartridges
    • Instruments – Transformer Oil Testers
      • TOR-1 Oil Moisture Meter
      • TOR-2 Hydrogen and Moisture Analyzer for Transformer Oil Monitoring
      • TOR-3 (TOR-3 SL) Oil Tan Delta Tester
      • TOR-6 Transformer Oil Moisture and Particles Tester
      • TOR-7 Universal Transformer Oil Tester (moisture, gases, solid particles)
      • TOR-8 tester for residual gas content of insulating oil
      • TOR-60 (TOR-60 SL) Breakdown Voltage Tester
      • TOR-80 (TOR-80 LSL) Breakdown Voltage Tester
      • TOR-80A (TOR-80 ASL) Transformer Oils Breakdown Voltage Tester with Battery
      • TOR-100 (TOR-100 SL) Breakdown Voltage Tester
    • Wind Turbine Service
      • CMM-G wind turbine gearbox oil changer (with dimensions adapted to the customer’s trailer ones)
      • CMM-G Wind Turbine Gearbox Oil Changer
      • CMM-GL Wind Turbine Gearbox Oil Changer
      • CMM-0.6L Oil Degassing & Filtration Cart
      • CMM-4,0T Turbine oil filtration
    • Medical Equipment Maintenance
      • CMM-0.6 X-ray Transformer Oil Purifier
      • AVSk-150 Hospital Wastewater Treatment Complex
    • Blending systems
      • USBL-1 Laboratory Blending System
      • USB-1 Fuel oil blending system
      • USB-5 high-speed mixing unit for production of sanitizers (0.15 – 0.3 m3/h)
      • USB-5 high-speed mixing unit for production of sanitizers (1.1 m3/cycle)
      • USB-6 Impeller Stirrer
      • Colloid Mill
      • Vortex Layer Devices
    • Colloid Mill
      • Colloid mills for food industry
        • CLM-100.3 Colloid mill
      • Colloid mills for bitumen emulsion production
        • CLM-0.25.1 Laboratory colloid mill
        • CLM-2/4 Colloid mill
        • CLM-16/25 Colloid mill
      • Colloid mills for bitumen modification
        • CLM-8/16 Colloid mill
        • CLM-10/20 Colloid mill
        • CLM-40.2 Colloid Mill
      • Colloid mills for different applications
        • CLM-100.2 Colloid Mill
        • CLM-200.2 Colloid Mill
    • Vortex Layer Devices
      • AVS-100 Mixing Machine. Vortex Layer Device
      • AVS-150 Chemical Mixing Machine
      • AVSp-100 Vortex Layer Device (Semi-Automated)
      • AVSp-150 vortex layer device (semi-automated)
      • AVSk-150 Wastewater Treatment Complex
    • Bitumen emulsion plant, Bitumen Emulsion Production
      • CLM-0.25.1 Laboratory colloid mill
      • USB-2 Bitumen emulsion unit 2 m3/hour production capacity
      • USB-2 Bitumen emulsion plant 8 m3/hour production capacity
      • FB Bitumen filter
      • USB-6 Impeller Stirrer
    • Bitumen Modification Plant. Modified Bitumen Production
      • USB-3 Bitumen modification laboratory system
      • USB-3 Continuous Bitumen Modification Unit (12 m3/hour)
      • USB-3 Bitumen modification unit 16 m3/hour production capacity
      • USB-4 Modified bitumen collection tank (USB-3)
      • USB-6 Impeller Stirrer
    • Laboratory system for Bitumen Emulsion Samples
      • CLM-0.25.1 Laboratory colloid mill
      • CLM-100.1 Bitumen Emulsion Laboratory System
      • USB-3 Bitumen modification laboratory system
    • Biodiesel Equipment
      • USB-1L Biodiesel laboratory equipment
      • USB-1 Biodiesel equipment
        • Filters
          • The filter GC Fine with a filtration factor β = 4000
        • Vacuum Pumps
          • GC Roots Vacuum Pumps
          • مضخات التفريغ GC Vane (مضخات دعم)
    • Custom Equipment
      • CMM-4R TRANSFORMER OIL REGENERATION MACHINE
      • CMM-1 MOBILE OIL PLANT
      • CMM-2.2 MOBILE OIL PLANT
      • CMM-4 MOBILE UNIT FOR POWERED TRANSFORMER OIL PROCESSING
      • CMM-12A DEGASSING UNIT
      • CMM-1CO CABLE OIL DEGASSING UNIT
      • CMM-5M INDUSTRIAL OIL PURIFICATION MACHINE
      • CMM-8RP Sorbent Reactivation Unit
      • BDK-3 CATALYTIC CONVERTER
      • CMM-600CF TRANSFORMER OIL FILTRATION AND REFILLING MACHINE
      • SN-1 PUMP ASSEMBLY
      • SBE-30 BITUMEN EMULSION COLLECTION TANK (UVB-1)
      • UVB-1 BITUMEN EMULSION UNIT 1 M3/HOUR PRODUCTION CAPACITY
      • UVB-1 EXTENSION 1 M3/HOUR PRODUCTION CAPACITY
      • INDUSTRIAL MIXER – COLLOID MILLS CLM-4 SMALL
      • BIG COLLOIDAL MILL CLM-18 GRINDING MACHINE
      • INDUSTRIAL MILL – GIANT COLLOIDAL MILL CLM-22
      • CMM-0.6 Clean Marine Oil Degassing Cart
      • Compressed Air Supply Unit UOV
    • Accessories & Components
  • Dealers
  • Tech School
    • Webinar Registration
  • News & Articles
  • History
  • Reviews
  • AskMe
  • Contacts
EN ▼
  • PT-PT
  • FR
  • ES
  • DE
  • AR
  • PL
  • UA
  • ID
  • VN
  • IT
  • GE
  • UZ
  • CN
  • KZ
  • CZ
  • NL
    TR
    JP
    CZ
    DK
    FI
    GR
    IL
    IN
    HU
    KR
    NO
    RO
    SK
    SI
    SE
    TH
    BG
    HR
    EE
    LT
    LV
    MY
    IR
NL
TR
JP
CZ
DK
FI
GR
IL
IN
HU
KR
NO
RO
SK
SI
SE
TH
BG
HR
EE
LT
LV
MY
IR

Smart search

×
  • You must be logged in to create new topics.
Login with Google

GlobeCore FAQ

Login

Topics

Last answer

  • Why is gearbox flushing important before refilling with new oil?

    Started by: Linda Jackson

  • 4 months, 1 week ago

    Nancy Harris

  • How does the unit handle the removal of used oil from the gearbox?

    Started by: Sarah Davis

  • 4 months, 1 week ago

    Brandon Martin

  • What are the three main operating modes of the CMM-G unit during an oil change?

    Started by: Nancy Harris

  • 4 months, 1 week ago

    Brandon Martin

  • What is the primary purpose of the CMM-G Wind Turbine Gearbox Oil Changer?

    Started by: Matthew Johnson

  • 4 months, 1 week ago

    Robert Thomas

  • What customization options exist for the US-6S chamber and accessories?

    Started by: 鈴木 聡太郎

  • 4 months, 1 week ago

    Olga Ivanova

  • How does the US-6S control cabinet interface with the drying process?

    Started by: Mohamed Alam

  • 4 months, 1 week ago

    Natalie Dupont

  • What are the typical industries or applications that benefit from US-6S drying?

    Started by: Laura Anderson

  • 4 months, 1 week ago

    Haruto Tanaka

  • How does vacuum drying impact transformer service life and reliability?

    Started by: Yara Haddad

  • 4 months, 1 week ago

    James Shepherd

  • What safety features are incorporated in the US-6S system?

    Started by: Ana Garcia

  • 4 months, 1 week ago

    Tyler Walker

  • Can the US-6S be adapted for transformers of different sizes and industries?

    Started by: Amanda Moore

  • 4 months, 1 week ago

    Yara Haddad

  • How does the condensation system in the US-6S work?

    Started by: Rachel Wright

  • 4 months, 1 week ago

    Yara Haddad

  • What automation options are available for US-6S installations?

    Started by: Christopher Mcdaniel

  • 4 months, 1 week ago

    Ana Garcia

  • How does the US-6S ensure even drying throughout the transformer core?

    Started by: Jason Taylor

  • 4 months, 1 week ago

    Fatima Alhassan

  • What vacuum levels and temperature ranges can the US-6S achieve?

    Started by: Maria Fernandez

  • 4 months, 1 week ago

    Patrick Scott

  • Why is moisture removal from transformer insulation crucial?

    Started by: 山本 修平

  • 4 months, 1 week ago

    David Allen

  • Describe the basic principle of operation for the US-6S Transformer Vacuum Furnace.

    Started by: Kevin White

  • 4 months, 1 week ago

    David Wilson

  • What are the main components of the US-6S system?

    Started by: Tyler Walker

  • 4 months, 1 week ago

    Richard Mcdaniel

  • How does vacuum drying improve transformer insulation quality compared to traditional methods?

    Started by: Agostino Falcone

  • 4 months, 1 week ago

    Robert Thomas

  • What is the US-6S Transformer Vacuum Furnace and what problem does it solve?

    Started by: Jason Taylor

  • 4 months, 1 week ago

    Plinio Arcos

  • What new features or improvements are planned for future versions of the LFD device (for example, an improved interface, remote monitoring, etc.)?

    Started by: Chris Miller

  • 4 months, 1 week ago

    Jason Taylor

Viewing 20 topics - 121 through 140 (of 582 total)
← 1 2 3 … 6 7 8 … 28 29 30 →
  • Home
  • Products
  • Dealers
  • Tech School
  • Contacts

® Copyright by - 2026 © GlobeCore

GlobeCore, Sadovskogo 14, Poltava, Ukraine, 36034

This website uses cookies to improve your experience. By continuing to browse, you agree to our use of cookies. на We use cookies to improve your browsing experience. Read more in our Privacy Policy.

forum-form-logo

Sign up

forum-form-logo

Sign in

To continue log in with Google.

Google Login