BRZ Zeolite Regeneration Block for Online Transformer Dry-Out System

GlobeCore / Products / Online Transformer Dry-Out Systems / BRZ Zeolite Regeneration Block for Online Transformer Dry-Out System
The BRZ regeneration unit is designed to restore the performance of the CMM-260C transformer dry-out system sorbent1 cartridges used in drying2 dielectric insulating oil3....
    Advantages
    • restoration of initial zeolite parameters;
    • other sorbents can be regenerated, such as silica gel;
    • can be used with a CMM-260C unit or alone;
    • compact size and mobility;
    • simple operation and servicing.

The BRZ regeneration unit is designed to restore the performance of the CMM-260C transformer dry-out system sorbent1 cartridges used in drying2 dielectric insulating oil3. The BRZ unit regenerates the cartridges by hot air to purge and clean the cartridges of excess moisture.

Parameter Value
Heater power, kW 10.8
Cooler blower drive power, kW 0.75
Nominal power, kW 13.2
Zeolite drying mode parameters
  • air blower throughput, m3/minute
2.3
  • hot air temperature, oC/F
250/483
Vacuum pulling mode parameters
  • evacuation rate, l/second
6.6
  • residual pressure, mbar (mPa)
250
Dimensions, mm:
  • length
1100/3’3’’
  • width
650/2’2’’
  • height
1250/4’1’’
Weight, kg 220/486.2
Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

  • restoration of initial zeolite parameters;
  • other sorbents can be regenerated, such as silica gel;
  • can be used with a CMM-260C unit or alone;
  • compact size and mobility;
  • simple operation and servicing.
Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

Loading...


Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].