CMM-1 MOBILE OIL PLANT
CMM-1
-
ADVANTAGES
- oil is purified by heat and vacuum, no need to reactivate or dispose of sorbent media;
- simple operation and servicing;
- mobility;
- several operation modes (filtration, heating, filtration and vacuum purification, degassing).
The plant is assembled on a frame, supporting the unit’s components: input and output oil pumps, dielectric control cabinet, vacuum1 chamber, coarse and fine cartridge filters2, vacuum pump3 and pipelines with valves.
| Parameter | Value |
| Capacity, м3/hour / gals. per hour: | 1.0/264.7 |
| Max oil output temperature in heating mode, °C/°F | 60/140 |
| Processed oil parameters*: | 10.0 |
| • mass moisture content, g/ton max | |
| • filtration fineness, micron | 5 |
| Oil output head, meters /yards | 20/21.86 |
| Max inlet pressure, MPa | 0.1 |
| Oil heater power, kW | 25.2 |
| Oil heater max mean surface power, W/cm2 | 1.1 |
| Nominal power, kW | 29 |
| 50 Hz AC power voltage, V** | 380 |
| Dimensions, mm/ft | 1300//4’3’’ |
| • length | |
| • width | 800/2’8’’ |
| • height | 1550/5’1’’ |
| Weight, kg/lbs | 540/1193 |
Note: * Initial oil parameters:
- mass moisture content – below 005% (50 g/ton)
- heating of oil in the unit to +60ºC ±5ºС/140ºF ±9ºF for 30 minutes;
- gas content below 10%.
**All equipment sold in the USA is designed to operate on 60 Hz AC Power
Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].
- oil is purified by heat and vacuum, no need to reactivate or dispose of sorbent media;
- simple operation and servicing;
- mobility;
- several operation modes (filtration, heating, filtration and vacuum purification, degassing).