CMM-2.2 MOBILE OIL PLANT
CMM-2.2
-
ADVANTAGES
- No need any sorbents, silica gel or zeolite for oil drying process
- Unit is compact, protected with metal doors, can be trailer mounted for on field usage
- Easy to operate and maintain, one-man operation
- Low energy consumption, noiseless and highly effective
The CMM-2.2 mobile oil plant removes solid particles, water and gases from dielectric insulation oil1.
The plant is used in the process of installation, repairs and operation of high voltage oil filled equipment (power transformers2, high voltage switches3 etc).
Operating conditions range:
- ambient temperature from 278 to 313°К (+5 to + 35°C/ 8°F to 104°F);
- atmospheric pressure 84 to 106.7 kPa (630 to 800 mm.hg);
- elevation up to 2000 meters/6561 feet above sea level;
- outdoors and under canopy;
- indoors with adequate ventilation.
| Parameter | Value |
| Capacity, m3/hour / gallon per hour: | |
|
2.2/582.34 |
|
1.0/264.7 |
| Processed oil parameters*: | |
|
10 |
|
5 |
|
1.5 |
| Max oil output temperature in heating mode, ºС/ ºF | 60/140 |
| Min outlet pressure, MPa | 0.2 |
| Oil heater power, kW max | 36 |
| Max power consumption, kW | 40 |
| Electric power | |
|
380 |
|
50/60 |
| Dimensions, mm/ft | |
|
1550/5’1’’ |
|
1000/3’3’’ |
|
1850/6’1’’ |
Note: * Parameters indicated in the table imply the following initial conditions:
- volumetric gas content – below 10.5%
- mass moisture content – below 0.005% (50 g/ton)
- temperature – above 0 ºС/32 ºF
- with initial heating of oil in the unit to +60± 5оС/ 140°± 9 ºF.
**All equipment sold in the USA is designed to operate on 60 Hz AC Power
Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].
- No need any sorbents, silica gel or zeolite for oil drying process
- Unit is compact, protected with metal doors, can be trailer mounted for on field usage
- Easy to operate and maintain, one-man operation
- Low energy consumption, noiseless and highly effective