UVD Vacuum Oil Filling Unit
UVD Vacuum Oil Filling Unit
30 L prepared oil amount | Filling | Compact | Mobility
The UVD vacuum filling unit is designed for degassing, storage, transportation, and addition of transformer oil into the high-voltage ports of transformers and switches. It is intended for use at power plants, substations, and other energy facilities. The unit can prepare 30 liters (7.8 gals) of oil, with a filling section capacity of 4 liters (1.06 gals), offering versatility for storing, transporting, degassing, and adding transformer oil.
The UVD vacuum1 filling2 unit is designed for preparation (degassing3), storage, transportation and adding of transformer oil into the high voltage ports of transformers4 and switches5; the unit is designed for operation at power plants, substations and other energy facilities.
| Parameter | Value |
| Amount of prepared oil, liters (gal) | 30 (7.8) |
| Amount of oil in filling section, liters (gal) | 4 (1.06) |
| Residual pressure in degassing section, Pa (mmHg) | 6.7 (5х10-2) |
| Oil supply pressure, MPa (kg/cm2) | Up to…0.4 (up to…4) |
| Rated power, kW | 0.25 |
| 50/60 Hz power supply voltage, V (60Hz USA) | 220 |
| Dimensions, mm (in): | |
| • length
• width • height |
900 (35.4) 780 (30.7) 1,500 (59.1) |
| Empty weight, kg (lbs) | 80 (176.8) |
- versatility (can store, transport, degas and add transformer oil);
- compact size and mobility;
- simple operation and servicing.
Application:
Loading...
Launch of GlobeCore equipment in Ecuador
In April 2021, GlobeCore service representative Jose Mora visited Ecuador where he held another launch of equipment. GlobeCore provides comprehensive power transformer maintenance solutions. Therefore, this time, our partner purchased...
Read More
GlobeCore Opens a New Service Center in Costa-Rica
Dear friends! We are happy to announce that a new service center commenced operations in Costa-Rica in November 2017. This service center will assist our clients throughout the Latin America....
Read More
Transformer Bushings: Testing and Maintenance of High-Voltage Bushings
Transformer Bushings When bushings are new, they should be Doble tested as an acceptance test. Refer to the M4000 Doble test set instructions, the Doble Bushing Field Test Guide [9],...
Read More
Vacuum Model UVD-4
Vacuum Model UVD-4, manufactured by GlobeCore, is used for topping off oil into high-voltage transformer bushings and circuit breakers. It is also used for preparing the transformer for its initial...
Read More
