The GlobeCore UVD oil injection machine into cable joints is a great modern way to look after power lines. The kit is designed to quickly and safely inject insulating oil into cable joints during installation, repair or routine maintenance. Cable connections in high-voltage lines need to have reliable insulation to make sure they’re stable and safe. If you’ve got low oil levels or it’s contaminated, you might end up with overheating, breakdowns and equipment failure. The UVD makes sure the oil is injected evenly, so there’s no risk of air or foreign particles getting in. The unit’s got a pretty powerful pump that lets you quickly and accurately deliver oil to wherever you need it. The UVD is small and easy to move around, so it’s great for use in substations and out in the field. GlobeCore’s UVD is a breeze to use, makes sure your cable connections are kept safe and sound, and you can count on them. This solution helps to extend the service life of equipment and avoid accidents.
Oil injection machine into cable joints UVD Specifications
| Parameter | Value |
| Amount of prepared oil, liters/gals | 30/7.8 |
| Amount of oil in filling section, liters /gals | 4/1.06 |
| Residual pressure in degassing section, Pa (mm.hg) | 6.7 (5х10-2) |
| Oil supply pressure, MPa (kg/cm2) | Up to…0.4 (up to…4) |
| Nominal power, kW | 0.25 |
| 50/60 Hz power supply voltage, V (60Hz USA) | 220 |
| Dimensions, mm/ft: | |
| • length
• width • height |
900/2’11”
780/2’7” 1500/2’4” |
| Empty weight, kg/lbs | 80/176.8 |
