GlobeCore’s US-6S seaport transformers drying oven is an effective way to remove moisture from transformers. This can be done before they are put into service or after maintenance. In seaports, transformers are always working in a humid environment, which means there’s a higher chance of moisture building up in the windings. If there is moisture in the transformer, it can reduce how well it insulates, which can lead to accidents or short circuits. The US-6S makes sure that the windings are dried at a low temperature in a consistent way. This helps to keep the transformer’s properties and make it last longer. The unit has a sealed chamber, vacuum pump, heating system and automatic temperature and pressure control. This makes it easy for the operator to control the process and get the same results every time. GlobeCore’s US-6S is a reliable piece of equipment for maritime infrastructure companies. It helps to provide a steady supply of power, improve safety and reduce the risk of port equipment breaking down.
Seaport transformers drying oven US-6S Specifications
| No. | Parameter | Value |
| Drying chamber | ||
| 1 | Internal dimensions, mm, max | |
| – depth | 2,000 | |
| – width | 1,300 | |
| – height | 1,600 | |
| Heating section | ||
| 2 | Heater power, kW | 45 |
| 3 | Temperature adjustment range, °С | 20…120 |
| 4 | Quantity of thermal electric heaters, pcs | 15 |
| Vacuum section | ||
| 5 | Capacity, m3/h | 1,000 |
| 6 | Total power level of engines, kW | 11 |
| 7 | Achieved vacuum level, mbar | 1 |
| Circulation system | ||
| 8 | Capacity, m3/h | 2,000 |
| 9 | Fan power, kW | 2.2 |
| Exhaust system | ||
| 10 | Capacity, m3/h | 2,000 |
| 11 | Fan power, kW | 1.1 |
| Condensation system | ||
| 12 | Chiller power, kW | 3.0 |
| 13 | Cooling performance of chiller, kcal/h | 6,000 |
| 14 | Condensation area, m2 | 7.5 |
| 15 | Heat exchanger (condenser) type | shell-and-tube |
| Pneumatic system | ||
| 16 | Compressor power, kW | 1.1 |
| 17 | Pressure, bar | 9 |
