GlobeCore’s US-6S water treatment plants transformers vacuum drying oven is a piece of equipment that has been designed with the intention of being effective in the process of removing moisture from transformers before they are put into operation. In the field of water treatment, it is important to consider the uninterrupted operation of electrical equipment, as this is key to the stable supply of clean water to the population and industry. During storage or repair, it is possible that transformers may accumulate moisture, which could potentially degrade their insulating properties and create a risk of failure. The US-6S provides deep vacuum drying, which we believe evaporates all moisture from inside the transformer without damaging the windings or insulation materials. It is understood that the unit is equipped with a hermetically sealed vacuum chamber, a heating system, and an automatic temperature and pressure control system. It is hypothesised that this will ensure the accuracy and safety of the drying process. The US-6S has been identified as a solution for water treatment companies, with the potential to enhance transformer reliability, reduce the incidence of accidents, and ensure the stable operation of critical infrastructure.
Water treatment plants transformers vacuum drying oven US-6S Specifications
| No. | Parameter | Value |
| Drying chamber | ||
| 1 | Internal dimensions, mm, max | |
| – depth | 2,000 | |
| – width | 1,300 | |
| – height | 1,600 | |
| Heating section | ||
| 2 | Heater power, kW | 45 |
| 3 | Temperature adjustment range, °С | 20…120 |
| 4 | Quantity of thermal electric heaters, pcs | 15 |
| Vacuum section | ||
| 5 | Capacity, m3/h | 1,000 |
| 6 | Total power level of engines, kW | 11 |
| 7 | Achieved vacuum level, mbar | 1 |
| Circulation system | ||
| 8 | Capacity, m3/h | 2,000 |
| 9 | Fan power, kW | 2.2 |
| Exhaust system | ||
| 10 | Capacity, m3/h | 2,000 |
| 11 | Fan power, kW | 1.1 |
| Condensation system | ||
| 12 | Chiller power, kW | 3.0 |
| 13 | Cooling performance of chiller, kcal/h | 6,000 |
| 14 | Condensation area, m2 | 7.5 |
| 15 | Heat exchanger (condenser) type | shell-and-tube |
| Pneumatic system | ||
| 16 | Compressor power, kW | 1.1 |
| 17 | Pressure, bar | 9 |
