A specialist device made for fully grinding and combining the ingredients for protective coatings is Globecore’s CLM-2/4 anti-corrosive waterproof coatings mill. It works well in industrial settings where a high level of material protection against moisture and corrosion requires a uniform and regular consistency. The colloidal process that underpins the CLM-2/4 aids in achieving a homogeneous mass by removing lumps and imperfections. This is particularly crucial when creating corrosion-resistant coatings because optimal surface protection necessitates the exact dispersion of all constituents. The equipment makes it possible to precisely manage the process parameters, resulting in coatings with a variety of qualities, including durability, high water resistance, and chemical resistance.
Anti-corrosive waterproof coatings mill CLM-2/4 Specifications
| No. | Parameter | Value |
| 1 | Unit capacity, m3/h (gpm) | 2…4 (8.8… 17.6)* |
| 3 | Operating temperature, °С (°F), not more than | 150 (302) |
| 4 | Maximum pressure, bar (psi), not more than | 10 (145) |
| 5 | Product operating volume, L | flow |
| 6 | Shaft seal type | packing |
| 7 | Rotor/stator tooling type | nozzle |
| 8 | Replaceable knife kit | optional |
| 9 | Knife axial gap (preset), mm | 0.5…1.5 (2·10-2…6·10-2 ) |
| 10 | Knife radial gap, mm (in) | 0.25 (10-3) |
| 11 | Knife tip speed, m/s (mph), not more than | 45 (100) |
| 12 | Mill shaft and bearing rotation speed, rpm | 6,350 |
| 13 | Electric motor shaft rotation speed, rpm | 2,900 |
| 14 | Drive power, kW | 11 |
| 15 | Power voltage, V | custom |
| 16 | Dimensions, mm (in), not more than: | |
| -length | 900 (35) | |
| – width | 580 (23) | |
| -height | 450 (18) | |
| 17 | Weight, not more than, kg (lb) | 190 (420) |
* – depending on the product (liquid).