The CLM-8/16 synthetic lubricant production machine from Globecore is a cutting-edge, effective device for producing premium lubricants. For petrochemical and industrial applications where accuracy and consistency in production processes are necessary, this solution is perfect. The CLM-8/16 guarantees consistent component distribution and mixing to create synthetic lubricants with predetermined properties. Temperature, mixing speed, and raw material ratio are just a few of the process parameters that may be precisely controlled by the machine. This ensures that the finished product will be highly stable and reliable. The CLM-8/16 is a flexible solution for businesses of all sizes due to its small size and simplicity of use. The machine is constructed from high-quality, chemical-resistant materials and is simple to integrate into production lines. This guarantees dependability and durability.
Synthetic lubricant production machine CLM-8/16 Specifications
| Parameter | Value |
| Mill capacity, m3/h (gpm) | 8… 16 (35… 70)* |
| Kinematic viscosity of product, mm2/s (St), not more than | 150 (1.5) |
| Initial size of polymer particles, mm (in), not more than | 5 (0.2) |
| Maximum operating pressure, MPa (psi) | 0.6 (87) |
| Rated rotation frequency, rpm | 2,950 |
| Drive motor power, kW | 75 |
| Parameters of electricity mains, V/Hz | custom |
| Nominal bore diameter of mill fittings, mm (in)
– inlet – outlet |
120 (4.7) 80 (3.1) |
| Operating temperature, °С (°F), not more than | 180 (356) |
| Mill shaft seal | packing |
| Knife gap adjustment type | manual |
| Knife gap adjustment range, mm (in) | 0,2…2 (8·10-3… 8·10-3) |
| Knife tip speed at 3,000 rpm, m/s (mph), not more than | 47 (105) |
| Dimensions (not more than), mm (in):
– length – width – height |
1,690 (67) 650 (26) 770 (30) |
| Net weight (not more than), kg (lb) | 780 (1,720) |
* – depending on the product (liquid).