September, this year, GlobeCore restarted production of Mojave Heat -100
“Mojave Heat-100” is designed for drying of transformer tanks with hot air, which is dehydrated and cleaned from mechanical impurities. This equipment prevents the ingress of moisture from atmospheric air into the electrical insulation and the active part of transformer when the transformer is depressurized. The new “Mojave Heat-100” is more compact in size than the previous models. The new design provides easy transportation, comfortable use convenient service and maintenance of electrical equipment.
The unit has a metal body, which is divided into two compartments. The unit dryes the atmospheric air in an adsorbent cartridge filled with synthetic zeolite. Then it purifies dried air from mechanical impurities in a dust filter.
Technical characteristics of Mojave Heat-100
| Parameters | Value | ||
| 1. Dry air capacity, m3 / min, min | 1,7 | ||
| 2. Dry air max dew point, ° С | – 50 | ||
| 3. Dry air pressure, MPa / bar | 0,018/0,18 | ||
| 4. Max dry air temperature, ° С | 90±15 | ||
| 5. Adsorbent load, kg, max | 190 | ||
| 6. Number of adsorbers, pcs. | 1 | ||
| 7. Zeolite max regeneration temperature, ° С | 430 | ||
| 8. Air heater power, kW, max | 24 | ||
| 9. Power consumption, kW, max | Air drying (normal mode) | 1 | |
| Regeneration of adsorbent in the adso | 25 | ||
| Hot air input | 25 | ||
| 10. Three-phase 50Hz, AC voltage, V | 380 | ||
| 11. Temperature of hot air output for regeneration of adsorbent, ° С, max | 430 | ||
| 12. Time for adsorbent regeneration, hours | 4 | ||
| 13. Fineness of dry air filtration, μm | 5 | ||
| 14. Overall dimensions, mm, max: | length | 1350 | |
| width | 800 | ||
| height | 1700 | ||
| 15. Weight, kg, max | 550 | ||
For information and advice on purchasing this equipment, please contact one of our contacts.
