GlobeCore / Oil Filtration / Oil Flushing Service

Oil Flushing Service

Insulating Oil

Oil Flushing is used in hydraulic and turbine system to remove any bad contaminants. It prevents you from unfortunate failures in functioning of your plants.  Therefore it gives you an opportunity to prolong its service life and reliability of operation of turbines.

Oil Flushing is performed through cleaning of the system and bringing the fuel fluids into proper condition. There are many different ways which can be chosen for this purpose. The usage of one or another technology or strategy based on the specific of contaminant, that should be removed. Not only origin of pollution is question, but also a type of equipment or machines you use. The amount of work of your system is important either.

Nevertheless the importance of proper cleaning or recycling service shouldn’t be neglected.

Importance of Oil Flushing

There are a great deal of state-of-the-art scientific studies that show out the importance of oil flushing. Especially it is an issue in industries related to the use of petroleum products.

If you do not clean the turbine oil, your system may be clogged and it can cause fails.

Thus a well-timed clearing of oil can give you significant financial advantages:

  1. First of all it’s an economy of facilities and avoidance of unforeseen expenses on repairings.
  2. The second point is to make your work as productive as possible. It is one of the main clues how to give your clients the products and service on a highest level. Quality and reliability should be a priority, so that you could appeal to more customers.
  3. The production standards in any area are very important at the present time, you have to do everything to reach the best level. Otherwise customers will not trust you. So in many industries technology of oil flushing is an opportunity to keep your facilities afloat for longer period.

Oil Flushing Methods

There are different types of oils that can be flushed:

  1. insulating oil;
  2. transformer oil;
  3. industrial turbine oil;
  4. compressor oil.

Recycling and flushing can be physical, chemical or physico-chemical.

In physical methods can include gravitational, centrifugal, electrical, magnetic or vibrational power. There can also be used a wide range of filtrations.

As a chemical method can be used sedimentation of mechanical particles.

Each way of oil purification has it’s advantages and disadvantages. Some of them cheaper then the other, but it doesn’t always give guaranties of better quality. Some methods can be outdated for current newly developed systems.

There are many different methods and technologies, but the most effective is combination of main physico-chemical aids and appliances as adsorption, selective dissolution, dehydration and filtration units.

One of the best ways to clear the oils is using different modern equipment as Transformer oil purifier that is designed and produced by GlobeCore.

Leave your request

    GlobeCore Equipment