GlobeCore / Products / Oil Purification and Filtration Systems / CMM-6LT Industrial Oil Purification Unit

CMM-6LT Industrial Oil Purification Unit

GlobeCore / Products / Oil Purification and Filtration Systems / CMM-6LT Industrial Oil Purification Unit
The mobile oil station CMM-6LT is designed for thermovacuum drying, filtration, and purification from mechanical impurities and water of oils...
    Advantages
    • compactness;
    • oil heating capability;
    • high degree of filtration;
    • high maneuverability;
    • protection against oil overheating;
    • oil drying.

The mobile oil station CMM-6LT is designed for thermovacuum drying, filtration, and purification from mechanical impurities and water of oils used in lubrication systems, sealing systems, hydraulic control systems of gas turbine and gas compressor units, gas-motor-compressors, as well as transformers, during operation and maintenance.

The unit can be used for cleaning contaminated oils from water, free and dissolved gases, heating and drying oil-filled electrical apparatuses with hot transformer oil, using the thermovacuum drying method. Additionally, it can remove mechanical impurities through high-efficiency filter elements. The unit is applied in assembly, repair, and operational organizations engaged in oil processing and purification.


The unit can process mineral transformer oils with the following properties:

  • kinematic viscosity at 50 °C – 2…12 mm2/s;
  • oil mass moisture content – not more than 100 ppm;
  • density at 20°C – 800…950 kg/m3;
  • industrial cleanliness class according to ISO 4406 – not worse -/19/16.

Specification

Value

1 Productivity, m3/hour, not less than

  • in filtration mode
  • in thermal vacuum drying mode

6,0

4,0-6,0

2* Processed oil parameters (after several passes):

      –  total gas content, % not more than
      –  oil mass moisture content, g/t, not more than
      –  industrial cleanliness class according to ISO 4406

1,5

10

-/14/12

3 Maximum oil temperature at the outlet, ºC

55-60

4 Outlet pressure, bar

3

5 Oil heater power, kW, not more than

42

6 Maximum power consumption, kW, not more than

50

7 Electrical current parameters

Voltage, V 

Frequency, Hz 

Number of phases 

380

50

3

8 Overall dimensions, mm, not more than

– length
– width
– height

1100
780
1470

9 Weight, kg, not more than

475

Note: * initial oil parameters:

  • Volumetric gas content – below 10.5%;
  • Mass moisture content -below 0.01% (100 g/t);
  • Temperature – above 0 ºC.

After multiple passes of the oil through the installation.

Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].

  • compactness;
  • oil heating capability;
  • high degree of filtration;
  • high maneuverability;
  • protection against oil overheating;
  • oil drying.
Equipment configurations that are not included in this configurator can be implemented via a separate request to [email protected].