Cleaning the oil used in on-load tap changers is made possible by GlobeCore’s extremely effective CMM-0.6L on-load tap-changer oil filtration system. Transformer stability is largely dependent on these devices, and their longevity and dependability are directly impacted by the oil’s cleanliness.
In order to preserve the oil’s high dielectric qualities, the CMM-0.6L is especially made to extract moisture, gasses, and mechanical contaminants from it. To avoid premature wear and failures, high-quality oil filtering is crucial for on-load tap-changers, as they are frequently exposed to high loads. For power systems to operate dependably and to avoid emergencies, this is especially crucial.
High efficiency and the capacity to purify oil to the necessary standards in a single filtration cycle are the primary benefits of the CMM-0.6L.
On-load tap changer oil filtration system CMM-0.6L Specifications
| No. | Parameter Description | Value |
| 1 | Efficiency, m3/hour | 0.6 |
| 2 | Power supply (AC 50Hz, V) | 380* |
| 3 | Rated input power, kW | 14 |
| 4 | Pre-filter, micron | 200 |
| 5 | Degree of filtration, microns | 5 |
| 6 | Cleanliness level after processing (as per ISO 4406) | -/14/12 |
| 7 | Oil breakdown voltage not less, kV | 60** |
| 8 | Outside dimensions (excl.hoses) not more, mm | |
| — length | 750 | |
| — width | 525 | |
| — height | 1450 | |
| 9 | Weight (without oil) not more, kg | 230 |
* – any voltage available at customer’s request
** – provided that the processed oil has not been in use.
You can purchase the CMM-0.6 degassing unit right now by contacting one of our managers on the contact list.
In order to change the default parameters to your specific needs, the Customer must fill out a questionnaire, wherein you should include the necessary technical requirements.
