CMM-12R Oil Regeneration Systems
CMM-12R
-
Advantages
- Extra vacuum pump assembly for transformer vacuuming;
- Mounted on a trailer or semi-trailer;
- Moisture meters at the inlet and/or outlet of the oil stream;
- Remote control and process monitoring via smartphone or PC;
- Climate-controlled operator workroom.
**GlobeCore** manufactures oil regeneration systems for both transformer manufacturers and transformer service providers.
**GlobeCore** units are loaded with a sorbent that captures all oil decomposition products.
**GlobeCore** regeneration systems can use the same sorbent for up to 3 years before the first replacement. No more need for consumables and costly labor related to the replacement of exhausted sorbent at the job site.
Regeneration systems can be combined with degassing units or purchased as stand-alone systems.
**GlobeCore** regeneration systems can be used in combination with your existing degassing or drying unit.
Each **GlobeCore** unit can be customized and includes a number of options:
- Description
- Specifications
- Advantages
- Application
- Configurator
- Webinars
- Payback Period
- Video
- Gallery
- Research articles
GlobeCore’s oil regeneration process restores used oils to a condition close to new oil. This process makes it possible to fill transformers with oil that would otherwise have been disposed of. The oil can be used in the transformer without replacement throughout its entire service life.
GlobeCore’s CMM-R systems are designed to extend the transformer’s lifespan by restoring the dielectric strength and chemical composition of dielectric insulating oil.
In the oil regeneration process, oil degradation products and acidic compounds are removed, the oil becomes clear, oxidation resistance improves, while its gas solubility is reduced.
| No. |
Parameter |
Value |
| 1 | Nominal capacity, l/h (gpm) |
1000-2000 (4.4-8.8) |
| 2 | Oil losses during operation, % |
2-25 |
| 3 | Maximum allowed oil temperature, °C (°F) |
90 (194) |
| 4 | Outlet pressure, bar (psi) |
2.5 (36.25) |
| 5 | Maximum power consumption, kW |
55 |
| 6 | Rated vacuum suction speed, l/h (gpm) |
280,000 (1232.8) |
| 7 | Fuller’s Earth mass, kg (lbs) |
1600 (3527.4) |
| 8 | Electrical power parameters | |
| Voltage, V |
Customizable |
|
| Frequency, Hz | ||
| 9 | Coarse filtration fineness (mesh filter), µm |
100 |
| 10 | Pre-filtration fineness, µm |
25 |
| 11 | Fine filtration fineness, µm |
5 |
| 12 | Dimensions, mm (in) | |
| Length |
5500 (217) |
|
| Width |
2320 (91) |
|
| Height |
2450 (96) |
|
| 13 | Weight, kg (lbs) |
6000 (13227) |
Regeneration of the oil in a transformer restores used oil to new like condition:
| Parameter | Before processing | After processing |
| Moisture content by weight, g/t (ppm) as per IEC 733; ASTM D-1533 | 43 | 5 |
| ISO 4406 industrial purity class | -/18/16 | -/14/12 |
| Volumetric gas content % I.A.W. IEC 60599; ASTM D-3612 | – | 0.1 |
| Acid number, mg KOH/g I.A.W IEC 296; ASTM D-664 | 0.2 | 0.01 |
| Corrosive sulfur I.A.W.* IEC 5662; ASTM D-1275 | present | absent |
| Dielectric strength, kV I.A.W. IEC 156; ASTM D-18116 | 30 | 70 |
| Interfacial tension, N/m, at 25ºC I.A.W. IEC 6295; ASTM D-664 | – | 45 |
| Dissipation factor at 90ºC I.A.W. IEC 247; ASTM D-924 | 0.095 | 0.001 |
| Oxidation stability I.A.W. IEC 74; 164 hours | – | restored |
(*I.A.W. In Accordance With)
Aplication :
**GlobeCore** manufactures oil regeneration systems for both transformer manufacturers and transformer service providers.
**GlobeCore** units are loaded with a sorbent that captures all oil decomposition products.
**GlobeCore** regeneration systems can use the same sorbent for up to 3 years before the first replacement. No more need for consumables and costly labor related to the replacement of exhausted sorbent at the job site.
Regeneration systems can be combined with degassing units or purchased as stand-alone systems.
**GlobeCore** regeneration systems can be used in combination with your existing degassing or drying unit.
Each **GlobeCore** unit can be customized and includes a number of options:
- Extra vacuum pump assembly for transformer vacuuming;
- Mounted on a trailer or semi-trailer;
- Moisture meters at the inlet and/or outlet of the oil stream;
- Remote control and process monitoring via smartphone or PC;
- Climate-controlled operator workroom.
Aplication :
**GlobeCore**’s CMM-R units can be used for:
- Transformer oil regeneration;
- Electric train traction transformer oil regeneration;
- Turbine oil regeneration;
- Hydraulic oil regeneration;
- Gear oil regeneration;
- Industrial oil regeneration;
- Silicone oil regeneration;
- Oil bleaching;
- Regeneration of dielectric fluid Midel 7131;
- Regeneration of FR3 dielectric fluids;
- Gas condensate polishing;
- Marine fuel polishing;
- Diesel fuel polishing;
- Fuel oil polishing;
- Boat fuel polishing.
Aplication :
Aplication :
Aplication :
Aplication :
