GlobeCore FAQ
Topics
Last answer
- Does GlobeCore offer a calcium carbonate grinding machine capable of achieving a particle size distribution of D90 = 200-300 nm as shown in your video, and what configuration or technology is required to reach this fineness?
- 7 hours, 12 minutes ago
- Hello! Can this unit clean dyed diesel fuel used for agricultural machinery (it used to be dyed green and is now dyed with a blue reagent)? Will the cleaning process remove the dye, or only contaminants like water and particles?
- 7 hours, 46 minutes ago
- We want to process highly humified peat with high mineral content into a liquid extract for agricultural use, while retaining as much carbon/humic compounds as possible for maximum crop response. What extraction and separation technologies/equipment would you recommend?
- 8 hours, 19 minutes ago
- We are looking for equipment/mills to grind transparent iron oxide pigment. What technologies and types of mills would you recommend to achieve very fine particle size and good dispersion (for lab or production scale)?
- 8 hours, 53 minutes ago
- Can a colloid mill achieve the micron size needed for oats in a vegan chocolate spread (with oats, date juice, cocoa, hazelnuts, cocoa butter), and what fineness is realistically achievable for this application?
- 9 hours, 26 minutes ago
- We want to produce humic fertilizers from peat, leonardite, and vermicompost (biohumus). What equipment and processing technologies would you recommend for efficient extraction and production (liquid concentrate and/or dry product)?
- 9 hours, 59 minutes ago
- I saw a machine for grinding sesame. Can anyone recommend models or technologies suitable for sesame grinding, and what features I should consider for quality and efficiency?
- 10 hours, 33 minutes ago
- I want to buy a temperature and moisture (water content) meter/sensor with a display that can be integrated into a mobile transformer oil purification plant. Do you offer something like this, and what models/specs would you recommend?
- 11 hours, 6 minutes ago
- I’m researching a process that may require a colloid mill. I’m working with cellulose and want to produce nanocellulose. What type of mill/technology would be most suitable for this, and what key specs should I look at (shear level, gap control, passes, cooling)?
- 11 hours, 40 minutes ago
- I’m looking for a lab-scale colloid mill to process nut butter paste from a coarse grind to an ultra-fine grind (target particle size ~3-5 mil). What models/specs and processing setup would you recommend?
- 12 hours, 13 minutes ago
- What vacuum oil filling station would you recommend for power transformers rated 110/220 kV, and what key specifications should be considered for this application?
- 12 hours, 47 minutes ago
- What equipment and filtration technologies would you recommend for cutting soluble oil (coolant) filtration to remove fine particles and extend fluid life?
- 13 hours, 20 minutes ago
- We need to purchase a colloid mill for full-scale production of a medical suspension, with a target capacity of about 150 liters/hour. What specifications and technologies would you recommend (materials, rotor-stator design, shear/gap control, CIP/SIP, validation requirements)?
- 13 hours, 53 minutes ago
- What is the typical vacuum level required for a 75/95 MVA transformer rated 220/110-70/15 kV during drying and oil processing?
- 14 hours, 27 minutes ago
- I’m looking for a colloid mill to produce potassium humate. What equipment and processing technology would you recommend (capacity, rotor-stator gap, materials, and whether additional mixing/filtration is needed)?
- 15 hours ago
- Good afternoon. Do you offer an industrial hydraulic oil filtration unit for heavy-duty machinery that can filter at least 5,000 liters per day? Please specify the filter types/ratings it uses and the approximate cost.
- 15 hours, 34 minutes ago
- I provide repair and maintenance services for transformers ranging from 15 kVA to 3 MVA. What equipment and technologies would you recommend for servicing and maintaining transformers in this power range?
- 16 hours, 7 minutes ago
- I want to process peat moss to extract humic and fulvic acids, with the liquid extract as the main product. Target throughput is ~1,000 L/hour. What equipment and extraction technologies would you recommend (mixing, extraction, separation/filtration, and concentration), and what setup works best for continuous production?
- 16 hours, 41 minutes ago