On May 31 GlobeCore held a workshop on filtration and recovery of mineral oils in Cape Town. The event was attended by representatives of companies dealing with repairs and maintenance of power transformers. GlobeCore representative Mr. Frank May introduced equipment produced by our company to the participants. In particular, the following equipment was discussed: plantsRead More
June 1-2, 2016: GlobeCore held a series of presentations of equipment in Windhoek (Namibia). Representatives of Namibian power industry and other guests were presented with the proven and tried equipment, as well as with the newly designed models, developed by our engineers. Most interest was attracted by the plants for filtration, vacuum degassing and regenerationRead More
June 1, 2016: GlobeCore head office held a presentation of the company’s products This time we welcomed our guests from Bulgaria to demonstrate our technology of processing electrical insulation oil in power transformers. A GlobeCore lead engineer demonstrated the company’s experience and capabilities of the equipment for: filtration of mineral oil; degassing of mineral oil;Read More
Bitumen Emulsions Plant in Zimbabwe 28 April 2016 Zimbabwe’s Bitumen Emulsions Production Plant started its work with an opening ceremony. The symbolic start was made by Transport and Infrastructure Minister Dr Joram Gumbo, who cut the ceremonial ribbon. For GlobeCore this event was significant because the new facility is based on the GlobeCore UVB-1 plant.Read More
April 21-22, 2016 the GlobeCore German office in Oldenburg held a seminar on purification and regeneration of mineral oil. This event was attended by delegates from Belgium, the UK and the Czech Republic. Note that there is a successful International Training Center in Oldenburg, where anyone can take a course in operating GlobeCore oil filteringRead More
March 1-4, Dubai hosts the annual 41 th Exhibition of energy companies – Middle East Electricity 2016. With more than 1,500 international companies from 56 countries and more than 2,000 professionals, representing Middle Eastern branches taking part. One of the participants is a German company GlobeCore – introducing an oil regeneration plant UVR. There, on theRead More
GlobeCore announced the opening of a new service center in US. The address of the new location is 1750-H Dickinson Ave (FM 1266) Dickinson, TX, 77539. T: + 1-713-429-1616 and + 1-713-828-7877. Our other offices and service centers are available in the section “Contacts”. GlobeCore is one of the world leaders in industrial manufacturing. ProductsRead More
Bitumen Equipment in Ghana GlobeCore provides customer support during design and production of equipment, and also during its operation. GlobeCore staff periodically visits units in operation to monitor their condition and share experience. At the beginning of 2016, the choice fell on Ghana. Transport infrastructure of Ghana is represented by railways with total length ofRead More
February 2 guests from Switzerland visited German office of GlobeCore in Oldenburg. Representatives of a Swiss company: director and a chief engineer expressed a wish to get acquainted with GlobeCore’s equipment and to assess its possible application in their manufacturing – the production of lubricants and other petroleum products. The guests were shown recycling capabilitiesRead More
On 17 Decembe 2015, GlobeCore engineers successfully commissioned an automated Mojave Heat Hot Air Drying unit in Oman. The Mojave Heat is designed to dehydrate atmospheric air and reduce its dew point to between -50ºC and -70ºС and to remove particulate matter from that air. The Mojave Heat can be used during installation and repairsRead More
On December 3, 2015 GlobeCore employees successfully completed the commissioning of a new GlobeCore CMM-4D oil degassing unit in Uganda. The main advantage of the CMM-4D is its versatility. With the CMM – 4D unit you can perform the following operations: purification of insulating oil by removing mechanical impurities (filtration fineness is 5 microns), waterRead More
Oil recycling equipment A CMM-10 used oil degassing plat combined with the BV-200 vacuum unit have been in commissioning in Saudi Arabia from 14 to 17 December 2015. Various CMM units have already been commissioned in Saudi Arabia before. The demand on these units is due to their versatility: by purchasing just one unit, theRead More
Transformer oil reclamation to Kyrgyzstan In December 2015 our company’s specialists visited Kyrgyzstan (the cities of Bishkek and Osh), where they made several presentations for the power industry representatives. The presentations were focues on transformer oil regeneration process to improve transformer reliability and extend lifetime. GlobeCore offers unique technology, which allows to restore used transformerRead More
MM-12R Regeneration Unit Gets Ready to Regenerate Transformer Oil! On 15 November 2015, in the city of El Paso, Texas, USA, GlobeCore employees completed the commissioning and start-up of a new GlobeCore CMM-12R oil regeneration unit. This CMM-12R unit is designed for the complete regeneration of dielectric transformer insulating oil by removing moisture, contaminants andRead More
Bitumen Road Equipment Presentations in Bulgaria Starting On 18 October 2015 through 24 October 2015 presentations of bitumen emulsion equipment, produced by GlobeCore, were held in several cities in Bulgaria. GlobeCore representatives visited the Bulgarian cities of Varna, Plovdiv, Rousse and Blagoevgrad. It should be noted that this is not the first time GlobeCore representativesRead More
GlobeCore Bitumen Road Equipment Presentations A delegation of GlobeCore representatives visited Azerbaijan from the 12th through the 16th of October 2015. The GlobeCore representatives visited Baku and Gyandzha where they made four presentations and demonstrated the operation of the GlobeCore UVR-L laboratory unit. The various lines of GlobeCore oil processing and transformer service equipment wereRead More
On July 5, 2015 GlobeCore Clean Marine Unit (capacity 4m3/h) was commissioned on the Chevron’s offshore drilling platform, in 250 km from the seacoast of Nigeria. For many years, oil and gas have been considered to be the main source of energy. The depletion of the existing deposits of mineral resources has prompted people toRead More
Сhecked the Readiness of Oil Processing Equipment for Commissioning GlobeCore Welcomes Potential as Well as Current Customers to Visit its Production Facilities. This fact has found a further confirmation when the Turkish delegation came to visit GlobeCore on April, 27. This delegation consisted of the employees of Andritz Hydro LTD. ST who were the customersRead More
Bitumen emulsion equipment Commissioning In February 2015, in Baku (Azerbaijan), GlobeCore representatives commissioned the USB-1 unit with a capacity of 2 m3/h. Bitumen emulsion equipment is designed to produce cationic and anionic bitumen emulsions that fully meet the worldwide quality standards. Nowadays, much preference is given to bitumen emulsions rather than hot bitumen whenRead More
Insulating oil in Power Transformer Oil-impregnated paper is widely used in power transmission equipment as a reliable insulation. However, copper sulphide deposition on oil-paper insulation can lead to insulation failures in power transformers. The paper shows the influences of copper sulfur corrosion and copper sulphide deposition on copper wires and oil-paper insulation in power transformers.Read More
